BYD ATTO 1

Manual BYD ATTO 1 ini merangkum panduan penggunaan dan perawatan utama kendaraan. Pembahasan utama mencakup Keamanan Berkendara, Petunjuk Pengoperasian, Perawatan Berkala, Mengatasi Masalah, Spesifikasi

Unduh gratis Owner's Manual BYD ATTO 1 dalam format PDF. Panduan servis, spesifikasi, dan prosedur perawatan.

Download Owner's Manual BYD ATTO 1 | BukuManual Indonesia

Foreword

Thank you for choosing BYD. To better use and maintain the vehicle, please read this
manual carefully and keep it for future reference.

Special instructions: BYD Auto Industry Co., Ltd. recommends that you choose genuine
spare parts and use, maintain, and repair the vehicle in accordance with this manual.
The use of non-genuine spare parts to replace or modify the vehicle will affect the
performance of the entire vehicle, especially its safety and durability. Vehicle damage
and performance issues caused thereby will not be covered by the warranty. In addition,
vehicle modifications may also violate national laws and regulations and local government
regulations.

Thank you again for choosing BYD. Your valuable comments and suggestions are welcome.
In order to ensure better service for you, please be sure to provide accurate contact
information. If there is any change, please contact the authorized service shop of BYD
Automobile in time to update the system. At the same time, please pay attention to the
relevant national laws and regulations and local policies and regulations in time, and
license the vehicle as soon as possible, otherwise there may be a risk of failure to license.

The descriptions marked with the asterisk (*) in this manual are specific to only some
model configurations, and applicable only when the vehicle has these configurations. If
there is any difference with the vehicle you purchased, the configuration of the actual
vehicle shall prevail.

Pay attention to the "WARNING", "CAUTION" and "REMINDER" symbols in this manual, and
follow the instructions carefully to avoid injury or damage. The hint types are defined as
follows:

WARNING

WARNING
Items that must be observed to ensure personal safety.

CAUTION

CAUTION
Items that must be observed to avoid damage to the vehicle.

REMINDER

REMINDER
Items that must be observed to facilitate maintenance.

Page 1

is a safety mark to indicate an operation that should not be performed or an event

that should not happen.

This manual is expected to help you use the product correctly, and does not provide any
description of the configuration and software version of this product. For details about the
product configuration and software version, please refer to the contract (if any) related to
this product, or consult the dealer who sold the product to you.

Copyright © BYD Auto Co., Ltd. All rights reserved.

Page 2

No part of this document may be reproduced, copied, stored, translated, or
transmitted electronically or in any other form without prior written consent and
authorization of BYD Auto Industry Co., Ltd.

All rights reserved

Page 3

Page 4

Illustration Index

Exterior..............................................9

Dashboard....................................... 10

Interior............................................ 11

Doors...............................................12

Safety

Seat Belts.........................................14

Seat Belt Overview.................................. 14

Using Seat Belts.......................................14

Airbags............................................ 16

Airbag Overview...................................... 16

Driver and Front Passenger Airbags....... 17

Front Seat Side Airbags...........................17

Side Curtain Airbags................................18

Airbag Triggering Conditions and
Precautions..............................................18

Child Restraint Systems.................... 22

Child Restraint Systems.......................... 22

Child Safety:.............................................22

Anti-theft Alarm System....................26

Anti-theft Alarm System..........................26

Event Data Recorder System............. 27

Event Data Recorder System...................27

Instrument Cluster

Instrument Cluster........................... 32

Instrument Cluster View..........................32

Instrument Cluster Indicators.................33

Controller Operation

Doors and Keys.................................40

Keys..........................................................40

Locking/Unlocking Doors....................... 43

Smart Access and Start System.............. 47

Child Protection Lock..............................48

Seat................................................. 49

Seat Precautions..................................... 49

Adjusting Front Seats.............................. 50

Folding Rear Seats...................................52

Rear Seat Head Supports........................52

Steering Wheel................................. 53

Adjusting the Steering Wheel..................53

Steering Wheel Switches.........................54

Wipers............................................. 57

Wiper Switch............................................57

Replacing Wiper Blades.......................... 58

Side Mirror....................................... 59

Interior Rearview Mirror..........................59

Side Mirrors..............................................59

Switches.......................................... 61

Light Switches......................................... 61

Driver's Door Switches............................ 63

Window Control Switch on
Passenger Side........................................ 65

Odometer Switch.................................... 65

Driver Assistance Switches..................... 65

Hazard Warning Light Switch..................66

Interior Light Switch................................66

Using and Driving

Charging/Discharging.......................68

Charging Instructions..............................68

Charging...................................................72

Charge Port Anti-theft Lock.................... 78

Discharging Device*................................ 79

Page 5

Battery.............................................82

Power Battery and Charging System......82

Low Voltage Battery................................ 84

Charge Preheating...................................86

Usage Precautions............................86

Break-in Period........................................86

Suggestions for Vehicle Use....................87

Trailer Towing..........................................88

Driving Safety Precautions......................88

Carrying Luggage.................................... 88

Fire Prevention........................................ 89

Saving Energy and Extending
Vehicle Service Life..................................90

Snow Chains............................................91

Starting and Driving......................... 92

Starting the Vehicle................................. 92

Remote Start............................................94

Gear Shift Controls..................................94

Electronic Parking Brake (EPB)...............95

Automatic Vehicle Hold (AVH).................97

Driving Precautions.................................98

Driver Assistance............................ 101

Adaptive Cruise Control (ACC)
System*..................................................101

Intelligent Cruise Control (ICC)
System................................................... 105

Forward Collision Warning (FCW)* &
Automatic Emergency Braking (AEB)*..107

Traffic Sign Recognition (TSR)*.............109

Intelligent High Beam Assist System *. 110

Lane Departure Assist (LDA)................. 112

Acoustic Vehicle Alerting System
(AVAS).....................................................113

Panoramic View System*...................... 114

Driver Monitoring Systems (DMS).........116

Parking Assist System........................... 117

Tire Pressure Monitoring.......................120

Driving Safety Systems..........................123

In-Vehicle Devices

Infotainment System...................... 128

Infotainment Button............................. 128

Navigation Bar.......................................129

Gestures and Responses.......................129

OTA Updates.......................................... 129

BYD Assistant.........................................130

Bluetooth Call........................................131

External Applications............................ 131

BYD App......................................... 131

About BYD App.......................................131

Account Registration............................. 132

Vehicle Condition and Control..............132

Individual Center and Vehicle
Management..........................................132

BYD Mobile Phone Bluetooth Digital
Key*........................................................133

A/C System..................................... 133

A/C ON/OFF............................................133

A/C Operation Interface........................ 134

Function Definition............................... 134

Vents...................................................... 137

Storage.......................................... 137

Door Bins............................................... 137

Glove Box...............................................137

Center Console Storage
Compartment........................................137

Cup Holder.............................................138

Seatback Pockets.................................. 138

Other Devices................................. 138

Sun visor................................................ 138

Vanity Mirror.......................................... 139

Page 6

Grab Handles.........................................139

USB Ports...............................................139

SD Card Slot...........................................139

12V Auxiliary Power...............................139

Wireless Phone Charger*...................... 140

Hook.......................................................141

Maintenance

Maintenance Information................144

Maintenance Cycle and Items...............144

Regular Maintenance...................... 146

Regular Maintenance............................ 146

Vehicle Corrosion Prevention............... 147

Paint Maintenance Tips.........................148

Exterior Cleaning................................... 148

Interior Cleaning....................................149

Self-Maintenance............................151

Self-Maintenance.................................. 151

Vehicle Storage......................................153

Hood...................................................... 154

Cooling System......................................154

Braking System......................................154

Washer................................................... 155

A/C System.............................................155

Wiper Blades..........................................155

Tire......................................................... 156

Fuses...................................................... 159

When Faults Occur

When Faults Occur.......................... 162

Reflective vest........................................162

If Smart Key Battery Is Exhausted.........162

Emergency Shutdown System..............162

Vehicle Fire Rescue................................163

Battery Leakage Rescue........................163

If the Vehicle Needs Towing..................164

If a Tire Goes Flat...................................165

Specifications

Data............................................... 170

Vehicle Data...........................................170

Information....................................174

Vehicle Identification............................ 174

Warning Labels......................................175

Transponder Mounting Position...........176

Declarations of Conformity............. 177

Declarations of Conformity...................177

Abbreviations

Abbreviations.................................183

Page 7

Page 8

Page 9

Page 10

# Interior

| | | | |
| :--- | :--- | :--- | :--- |
| 1 | 12V Standby Power ***P139*** | 4 | Cup Holder ***P138*** |
| 2 | Start-up Function ***P92*** | 5 | USB Ports ***P139*** |
| 3 | Smartphone Wireless Charging* ***P140*** | | |

<br>

<p align="right">11</p>

Page 11

Doors

1
Opening with Interior Door Handle
P43

2
Door Bins P137

3
Driver's Door SwitchesP63

Window Lock Button P65

Central Door Lock P64

4
Hood Opening Handle P154

Page 12

# 01 SAFETY

Seat Belts......................................................... 14
Airbags............................................................ 16
Child Restraint Systems............................................ 22
Anti-theft Alarm System............................................ 26
Event Data Recorder System......................................... 27

Page 13

Seat Belts

Seat Belt Overview

Studies have shown that proper use
of seat belts can significantly reduce
casualties in emergency braking, sudden
steering, or collisions. Please read
the following information carefully and
observe it strictly.

●BYD has highly emphasized that driver
and occupants should always fasten
their seat belts while in the vehicle.

●Before and during the driving of the
vehicle,, ensure all passengers in the
vehicle fasten the seat belts. Failure to
do so increases the risk of injury in
case of an accident.

●The seat belts on the vehicle are
mainly designed according to the body
size of adults, and are not suitable for
children. Please select an appropriate
child safety seat according to the age
and body size of children (see P22).

●If the seat belt is damaged or
dysfunctional, immediately contact a
BYD authorized service provider for
confirmation and handling. Do not
use the corresponding seat before the
contact.

●It is recommended that children be
seated in rear seats and always
use seat belts and suitable child
restraints. In emergency braking or
collision, unprotected children may be
seriously injured and their lives may
be endangered. Likewise, do not allow
children to sitting on someone's lap,
for there is insufficient protection.

Pretensioner and Force Limiter
Function*

When the vehicle suffers a severe
frontal collision and the activating

conditions of the pretensioner are met,
the pretensioner quickly retracts some
of the seat belt and locks it to further
protect the driver and passengers. The
pretensioner limits the seat-belt restraint
force to the occupant's body to a certain
extent so as to avoid injury to the
occupant due to an excessive restraint
force.

WARNING

●If the pretensioner function is
activated, the seat belt must be
replaced.

Using Seat Belts

1. Adjust the seat position and seatback
angle See P50.

2. Adjust the position of the seat belt
properly.

●Keep a proper sitting posture and pull
the seat belt out to wear it diagonally
from the shoulder to the chest. The
belt should not go under the arm or
across the back of the neck. Keep the
belt lap part as close as possible to the
hip bone.

WARNING

●The shoulder belt should cross
the center of the shoulder. The
seat belt should be far from the

Page 14

WARNING

neck and not liable to slip from
the shoulder; otherwise, it cannot
function well in the event of
emergency braking or accident
and may even cause severe injury.

●The lap belt should be positioned
as low as possible across the hip
to prevent any injury caused by
pressing against the abdomen in
case of an accident.

●The seat belt should be fitted tight
to the body for better protection.

3. Insert the latch into the buckle until it
clicks and then pull it back to make sure it
is firmly locked. Do not fasten the belt if it
twisted.

4. Unbuckling Seat Belts

●Press the red unlock button on the
buckle. The latch plate pops out, and
the seat belt automatically retracts. If
the seat belt cannot retract smoothly
and automatically, pull it out to check
whether it is twisted.

01

SAFETY

WARNING

●One seat belt is for one occupant
only. Do not allow multiple
occupants (including children) to
share one seat belt.

●Avoid traveling with the seatback
leaning too far back. The seat belt
protection performs best when
the seatback is upright.

●Make sure that no seat belt or
its spring bolt/buckle becomes
pressed by the door or seatback;
otherwise, the seat belt may be
damaged.

●Check the seat belts regularly
for cuts, wear, looseness, and
other abnormalities. If any
problem is found, contact a
BYD authorized dealer or service
provider for confirmation and
handling. Until then, do not use
the corresponding seat.

●Do not remove, disassemble or
modify the seat belts.

●After an accident, have the seat
belts checked at a BYD authorized
dealer or service provider.

●In the event of a severe accident,
regardless of whether the seat
belt has an apparent damage,
replace it together with the seat
assembly, and thoroughly check
the airbag system.

Page 15

WARNING

●Pregnant women should also
fasten their seat belt properly.
Particularly, be sure to position
the lap belt as low across the
hip as possible to prevent serious
injury.

●Do not insert foreign objects such
as coins and clips into the buckle
as they prevent proper connection
between the latch and buckle.

REMINDER

●For normal functioning of the rear
seat belt, ensure that its latch is
inserted into the corresponding
buckle during use. The driver
should remind occupants to wear
seat belts properly.

●The driver should ensure that all
occupants are wearing seat belts
before driving the vehicle.

Seat Belt Reminders

If any occupant has not buckled up
after the vehicle is started, visual and
audible alarms go off and continue until
the corresponding seat belt is properly
fastened.

●Seat belt reminder indicator

When any seat's belt is not fastened,
the unfastened seat belt indicator
flashes.

●Display of unfastened belt's seat

When a seat belt is not fastened, the
indicator will light up and remain on
in case of abnormal conditions in the
vehicle.

●Unfastened seat belt reminder

If any vehicle occupant has not
buckled up after the ignition is
switched on, the seat belt reminder
indicator lights up. If the seat belt
remains unfastened while driving, in
addition to the reminder indicator, an
audible alarm is given to alert the
driver and the occupants.

●When all the occupants have buckled
up, the seat belt reminder indicator
turns off.

WARNING

●If the above functions are
abnormal or fail, contact a
BYD authorized dealer or service
provider. Do not use the
corresponding seat before the
functions return to normal.

●When driving, make sure all
occupants have their seat belts
properly fastened or in emergency
braking or collision, passengers
are more likely to be seriously
injured and their lives may be
endangered.

Airbags

Airbag Overview

●The airbag system, a part of the
supplemental restraint system (SRS),
is designed to supplement the seats
and seat belts. When SRS deployment
conditions are met in a serious
collision accident, the airbag system
deploys quickly to protect heads and
chests of both drivers and passengers
together with seat belts, thus reducing
the severity of injuries.

●The airbag system cannot replace the
seat belt. It is an integral part of the
whole passive safety protection system

Page 16

of the vehicle. Only when the airbag
works together with the fastened seat
belt can the airbag system provide
maximum protection.

●According to the collision type, the
airbag is generally divided into frontal
airbag and side airbag. The frontal
airbag includes the driver airbag and
front passenger airbag, and the side
airbag includes the front side airbag
and curtain airbag.

WARNING

●Only when the airbag works
together with the fastened seat
belt can the airbag system provide
maximum protection.

●Do not disassemble or assemble
the airbag components without
permission.

●After a collision, although the
airbag module is not deployed
and the pre-tensioner seat belt is
not locked, the airbag computer
may be encrypted to protect the
passengers from high voltage.
In this case, contact a BYD
authorized dealer or service
provider for inspection.

Driver and Front
Passenger Airbags

The driver airbag and front passenger
airbag can deploy to reduce the extent
of any injuries when the airbag system
ECU detects a moderate to severe head-
on collision during vehicle operation and
other airbag system triggering conditions
are also met.

01

SAFETY

WARNING

●Accessories, such as telephone
holders, cups, ashtrays, must not
be installed on airbag covers
or within their action range.
Otherwise, airbag deployment will
increase the risk of injury in an
accident.

Front Seat Side Airbags

If the model is equipped with one side
airbag for the front left seat and one
for the front right seat, (as shown in
the figure) the airbag is mounted on the
outside of each front seat backrest where
the word "AIRBAG" is marked.

●When the airbag triggering conditions
are met due to a moderate to
severe side impact during driving, the
airbag deploys to assist in protecting
the chest of the passenger on the
impacted side to reduce the degree of
injury.

Page 17

●Generally, only the airbag on the
impacted side deploys in the event of
a side impact.

●If the collision occurs on the passenger
side, the airbag on the passenger side
deploys even if there is no passenger in
the seat.

●In order to obtain the best protection
from the seat side airbag, the
passenger must fasten the seat belt
and sit upright against the seat back.

Seats Equipped with Side Airbags

1. Do not wet the seat backrest with
water. If the backrest is wet by rain or
water spray, the function of the side
airbag system may be hindered.

2. Do not cover or replace the
seat backrest cover by yourself.
Inappropriate seat backrest cover
replacement or covering hinders the
deployment of seat side airbags in the
event of a collision.

Side Curtain Airbags

●If the model is equipped with left
and right side airbags(as shown in
the figure airbags are installed at
the connection between the side
wall and the roof, and the words
"Curtain Airbag" are marked on the
A-pillar shield, B-pillar shield, and C-
pillar shield), When the ECU detects
a moderate or severe impact and the
trigger conditions are met, the side
curtain seat belt bag is deployed to
protect the occupant's head.

●In the event of a side impact, the
airbags on both sides will deploy.

●In order to obtain the best protection
from the side airbag, the passenger
must fasten the seat belt and sit
upright against the seat back.

Airbag Triggering
Conditions and
Precautions

Airbag Triggering Conditions

●The airbag triggering conditions are:
In the event of a vehicle collision,
whether an airbag will be triggered
is decided by factors such as the
amount of collision energy, accident
type, collision angle, obstacles, and
vehicle speed. The airbag system may
be triggered in special collisions.

●The airbag system does not always
work in any accident, and generally it
will not be triggered in the event of
a minor frontal collision, rear collision
or rollover. In this case, the driver
and passengers are protected by their
properly fastened seat belts.

●Determinants of airbag system
triggering: During a collision,
a comprehensive and intelligent
comparison is made between the
deceleration curve obtained by the
electronic control unit (ECU) and
the set value. If the signal such as

Page 18

the deceleration curve generated and
measured during the collision is below
the preset reference value in the
ECU, airbags do not deploy, even if
the vehicle may have been severely
deformed in an accident.

●The ECU of the BYD airbag system
has been set up with considerations of
common misuse and road conditions.
However, due to the increasing
changes in causes and forms of vehicle
collisions, for your safety, please
strictly follow this user manual, use the
vehicle correctly, and avoid its misuse.
Otherwise, there is no guarantee that
the airbags will achieve their expected
effect.

Cases When Airbags May Be Deployed

① The vehicle's nose hits the ground
when crossing a deep groove.

② The vehicle hits a bump or curbstone.

③ The vehicle's nose hits the ground
when going down a steep slope.

④ One side of the vehicle is hit by another
vehicle.

Cases When Airbags May Not Be
Deployed

① The vehicle hits a concrete column,
tree, or other slim objects.

② The tail of the vehicle is hit by another
vehicle.

③ The vehicle goes under a truck or
another large vehicle.

④ The vehicle rolls over.

01

SAFETY

⑤The vehicle hits a wall or a vehicle at a
side other than the front side.

⑥Parts other than the passenger
compartment receive side impact.

⑦The lateral side of the vehicle is hit
diagonally.

⑧The lateral side of the vehicle hits a
columnar object.

WARNING

●Airbags are designed for
specific models. Any changes to
suspension, tire size, bumpers,
chassis and factory-equipped
devices may adversely affect the
airbag system. Do not use any
component of the airbag system
on other models; otherwise, the
airbag system may fail and cause
personal injury.

Page 19

WARNING

●Drivers should maintain a distance
of at least 25 cm between their
chest and the steering wheel,
in order for the system to
provide the most effective driver
protection.

●Fasten your seat belt and sit
properly while the vehicle is
in motion. If the seat belt is
not fastened, and the occupant
is leaning forward or sitting
improperly, airbag deployment
can increase the risk of injury.

●Do not paste stickers, cover or
decorate the hub cover of the
steering wheel, the right side
surface of the dashboard or the
surface of A, B, and C pillar trims.
Clean these surfaces with a dry or
damp cloth, without applying too
much pressure.

●A child is not to be seated in
the front passenger seat, nor
are they to ride sitting on a
front passenger's lap, to prevent
serious injury or even casualty
caused by airbag deployment.

●Side curtain airbags and side
airbags deploy quickly with high
impact forces. Occupants must
not lean against the doors of
vehicles equipped with these
airbags while these vehicles are
in motion. Failure to do so could
result in serious injury or even
death.

●Do not place any other
accessories or items within the
action range of side curtain
airbags, including the windshield,
side door glass, A-pillar trim,
ceiling, B-pillar trim, C-pillar trim
and auxiliary handles. When
the side curtain airbag deploys,

WARNING

the accessories or items will
be thrown by the impact force
from the side air curtain airbag,
or the side curtain airbag may
not deploy normally, resulting in
serious injury or even death.

●When transferring vehicle
ownership, make sure to pass on
all of the vehicle's documents
and keep the new ownership
informed of airbag conditions and
replacement dates.

●Do not modify or replace seats
or trims of the seats with
side airbags. These changes
may prevent normal deployment
of side airbags, and thereby
cause airbag system failure or
unintended deployment of side
airbags, resulting in serious injury
or death.

●Do not disassemble or repair the
A-pillar trim, ceiling, B-pillar trim
or C-pillar trim, which contain side
curtain airbags. These changes
can cause failure of the airbag
system or accidental deployment
of curtain airbags, which may
cause serious injury or even
death.

●Do not change any component
of the airbag system, including
any corresponding label. It is
recommended that any operation
done to the airbags be performed
by a BYD authorized dealer or
service provider.

●Airbags can only provide one-time
accident protection. Once the
airbag is triggered or damaged,
the airbag system must be
replaced.

Page 20

WARNING

●Follow safety regulations and
procedures related to the
scrapping of parts of the vehicle
or its airbag system.

●The airbag system has strong anti-
interference and anti-disturbance
resistance to electromagnetic
fields around it. However, to
avoid accidents, do not use the
vehicle in an electromagnetic
environment that violates
national regulations.

●The airbag system of this vehicle
is designed with full consideration
of common misuses and road
conditions. However, in order to
avoid accidents, do not have the
bottom of the vehicle impacted
or drive roughly in harsh road
conditions.

●This vehicle's airbag system has
been fully verified to match
the vehicle's original wiring
harness system. Any wiring
harness modification or alteration
may cause the airbags to
deploy mistakenly under normal
conditions or fail to deploy in the
event of a collision.

It is recommended that you contact
a BYD authorized dealer or service
provider immediately if any of the
following situations occurs.

●The airbag has deployed.

●Instrument cluster airbag warning light

 lights up abnormally.

●Airbags do not deploy when the front
part (shaded part in the figure) of the
vehicle suffers a collision.

01

SAFETY

●The airbag cover has been scratched,
cracked or otherwise damaged.

●An impact to a vehicle door (shaded
part in the figure) in an accident is not
adequate to cause the curtain airbag to
deploy.

●The trimming (liner) of A-pillar,
roof rail, and C-pillar with curtain
airbag inside is scratched, cracked, or
damaged.

●Airbags need to be removed,
disassembled, installed or repaired.

Page 21

●The surface of the seat with a
side airbag is scratched, cracked, or
damaged similarly.

Child Restraint
Systems

Child Restraint Systems

Child restraint devices provide good
protection for child occupants in an
accident. For your child's safety, read
the child restraint instructions and the
instructions in this manual carefully
before installing the child restraint.

WARNING

●Never hold a child on your lap
while traveling in a car.

●Please choose a suitable
protection device for the child.

●Follow the instructions provided
with the child restraints and the
instructions in this manual to
ensure that the child restraints are
properly installed in the vehicle.

●When removing the child restraint
from the seat, make sure it is
stored securely.

●Failure to follow the advice given,
or the instructions from the child
restraint system manufacturer,
can endanger life or lead to
serious personal injury.

A suitable child restraint system should
be used and it is recommended that
the child be seated in the rear outboard
seating position. Children should be
seated comfortably and safely, and
children of all ages and sizes must always
be seated correctly in the vehicle.

Important Considerations for Selecting
Child Protective Equipment

●The type and size of the child
protection device is suitable for the
child.

●The child restraint is the correct type
for the seat position.

●Child protective devices must be ECE
R44 or ECE R129 approved.

Child Safety:

It is recommended that the child be
seated in the rear outboard seating
position and installed in accordance with
the child seat installation instructions
provided by the child seat manufacturer.

●The child seat should be secured with
a top tether, if appropriate.

●The back of the child seat must lie as
flat as possible against the vehicle seat
back.

●Adjust the seat back angle as needed
and place the child seat flat on the
back.

●If the child seat comes into contact
with the headrest after installation
and cannot be placed flat on the
backrest, raise the headrest completely
or remove it and store it safely in the
vehicle.

For additional installation instructions,
read the instructions provided with the
child restraints.

Installing Child Restraint Systems

Installation in the front seat

●Do not use rear-facing child restraints
on seats protected by active airbags in
the front, as this may result in death or
serious injury to the child.

Page 22

●When a forward-facing child restraint
system is used on the front passenger
seat, ensure that the seat is positioned
fully rearward away from the airbag.

1. Adjust the front passenger seat
rearward so that a child sitting in the
front passenger seat has no contact
with the interior of the vehicle.

2. Adjust the front passenger seat back
to make firm contact with the child
restraint system.

WARNING

●Never use a rear-facing child
seat in the front passenger seat
with the front passenger airbag
activated.

●Failure to follow the advice given,
or the instructions from the child
restraint system manufacturer,
can endanger life or lead to
serious personal injury.

●A forward facing passenger (child
or adult) must not be seated in
the front passenger seat with the
passenger airbag deactivated.

●When a forward-facing child
restraint system is used on the
front passenger seat, ensure
that the seat is positioned fully
rearward away from the active
airbag.

Installation in the rear seat

●The anchorage locations are identified
by a marking (see the illustration)
located on the seat cushion, directly in
front of the associated anchorages.

01

SAFETY

●The rear seats are equipped with
ISOFIX/i-Size anchorages.

CAUTION

●The anchorages are located in the
gap between the seat cushion and
the seatback.

●The rear seats are equipped with top
tether strap anchorages on the back.

●When the child restraint system is
installed on any rear seat, The front
seats can be adjusted forward, and the
front seatback angle can be rotated, to

Page 23

ensure there is no contact of the front
seats to the child.

●To ensure that the vehicle seat back
is able to safely support the child
restraint, the head restraint can be
adjusted or removed.

●When the child restraint is installed
with a top tether on a rearoutboard
seat:

●Route it at the outside of each head
restraint rod.

WARNING

●If the child restraint is a booster
pad only, without a seat back,

Seating position (or other positions)

1
3
4b)
5b)
6b)

Seating
position
suitable for
Universal
belted

X
X
YES
N/A
YES

Seating
position
suitable for i-
Size

X
X
YES
N/A
YES

Largest
suitable
Lateral child
X
X
NO
N/A
NO

WARNING

the head restraint must not be
removed and must be placed at
the proper height.

Installing CRS:

●① Rear right seat

●② Rear left seat

The following table shows the installation
options for ISOFIX or i-Size child restraint
system at the ISOFIX or i-Size anchorage
points of the individual vehicle seating
locations.

Page 24

Seating position (or other positions)

1
3
4b)
5b)
6b)

restraint
system

Largest
suitable
Rearward
child
restraint
system

X
X
R1/R2X/R2/R
3
N/A
R1/R2X/R2/R
3

Largest
suitable
Forward
child
restraint
system

X
X
F2X/F2/F3
N/A
F2X/F2/F3

Suitable for
booster seat
X
X
B2/B3
N/A
B2/B3

Suitable for
support leg
X
X
YES
N/A
YES

a)： If necessary, to ensure the child restraint system has direct contact to the rear
seatback, the head restraint should be adjusted or removed.

X： Seat position not suitable for securing a child restraint system.

Suggested Child Restraint Systems (Group
and child stature according to ECE R129).

Group
Child Stature
(cm)
Manufacturer
Child Restraint
Systems
Remarks

0
＜ 83
Maxi-Cosi
Pebble 360
Belted

0+/1
76-105
Britax Römer
Trifix 2 i-Size
ISOFIX and

2
＜ 135
Britax Römer
Kidfix i-Size a)
ISOFIX and

3
＜ 150
Osann
Booster Boost
Belted

a)Ensure:

01

SAFETY

belted

belted

Page 25

Group
Child Stature
(cm)
Manufacturer
Child Restraint
Systems
Remarks

●The lap belt is in the safety guard.

●The diagonal belt is not in the safety guard.

●SICT components are installed correctly.

① Group 0

② Group 0+/1

③ Group 2

④ Group 3

Anti-theft Alarm
System

Anti-theft Alarm System

If the vehicle is in anti-theft state and any
door is opened, the system will sound an
alarm and the turn signals will flash to
prevent the vehicle from being stolen.

Enabling anti-theft system

1. Power off the vehicle.

2. Have all occupants exit the vehicle.

3. Lock all doors. After 8s since all doors
have locked, the anti-theft system is
automatically activated.

4. Before leaving, confirm the anti-theft
function is activated. Make sure no
passengers are in the vehicle while
setting the alarm. Unlocking any door
from the inside can activate the
system.

Triggering the Alarm

●The anti-theft alarm is triggered when:

●a door or trunk lid is unlocked
without the smart key;

Releasing the alarm

●The anti-theft alarm is released when:

●Doors are unlocked with the smart
key.

●Doors are unlocked with the NFC key;

Page 26

●a door is unlocked with the
microswitch;

●The vehicle is started remotely with
the smart key.

●the START/STOP button is pressed
with the smart key inside the vehicle.

WARNING

●Do not modify the anti-theft
system by means of alteration or
addition. Otherwise, the system
may fail.

Event Data
Recorder System

Event Data Recorder
System

●This section provides you with
some important information on how
personal data is collected and
processed when you use a BYD vehicle.

●For a more detailed overview on data
processing, data protection and data
subject rights, please read the current
version of the privacy policy for the
vehicle available at the multimedia
system (Vehicle Settings → System
Settings→ More → Privacy Policy).

●This vehicle is equipped with an
event data recording (EDR) system.
EDR mainly records data in the
event of a crash or near-crash
(for example, airbag deployment or
hitting on a roadside obstacle) to
help comprehend the vehicle system
operation, such as:

●Vehicle Velocity:

●Tire pressure condition

●Adaptive cruise control (ACC) system
status

●Whether the seat belt is fastened

●The vehicle records EDR data only
when there is a crash or when a
near-crash event reaches a certain
extent. The EDR does not record any
data during the normal driving of the
vehicle.

01

SAFETY

●The data recorded by the EDR system
provides an understanding of the
state of the vehicle's safety-related
systems when an accident occurs, so
that relevant parties can analyze the
accident.

●The EDR data needs to be accessed
and read by special equipment.
BYD discloses your personal data to
third parties only if this is legally
permissible or you have consented
to it. In addition to the vehicle
manufacturer, third-party agencies
with professional equipment (such as
government agencies) can also read
the EDR data if they have access to
the vehicle EDR and equipment (for
example, The data from the airbag
control unit can be read out to clarify
the accident).

Vehicle Data Processing

●Data is collected when the vehicle
is used, such as data collected or
transmitted by vehicle sensors or
control units, which is necessary for
the safe functioning of your vehicle.

●In some cases, the data is used
to support driving (driver assistance
systems) or to enable a specific
comfort or multimedia function.

●Personal data that is collected and
processed mainly include in-vehicle
data, remote-services-related data,
and other data, as further specified
below.

Page 27

In-vehicle Data

Operation data

●When the vehicle is used, various
vehicle status data (e.g., speed,
battery level, and braking system) or
environment (e.g., distance sensors,
rain sensor, and temperature) data is
collected and processed.

●This data is not usually stored,
but there are control units, sensors
or other components installed in
the vehicle that record such data,
for example, to record maintenance
requirements, error messages, or other
information.

●The in-vehicle data will only be
stored in the equipment in the
vehicle but can be read out via
the legally required OBD ("On Board
Diagnostics") interface, for example,
by BYD authorized dealer or service
provider or other third parties.

●In case this access takes place
during vehicle maintenance, the
information can also be transmitted to
BYD engineers for quality assurance,
product defect reports, or customer
claim verification.

Remote-Services-Related Data

Remote monitoring services

●The vehicle has remote monitoring
services.

●These include remote monitoring
services such as remote diagnosis
and over-the-air (OTA) updates
and upgrades for security and
safety purposes (subject to owner's
approval).

●These monitoring services serve the
following purposes: service provision
(remote support/diagnostics), product
development, and security/public
safety.

●Depending on the country and setup,
various vehicle information can be
transmitted to BYD's data center in
corresponding market for the above
purposes, including vehicle location
information, vehicle status, such as
energy consumption, vehicle speed,
gear position, power mode, ESC status,
steering system status, battery status,
powertrain status, and overall vehicle
performance status.

Other

Multimedia system

●Depending on vehicle configuration,
data can be added to the multimedia
system by the users themselves, such
as media data for playing video on the
multimedia system, address data for
use in the navigation system, or data
for use in online services.

●Depending on vehicle configuration,
individual settings in and on the
vehicle can also be entered.

●Data stored in the vehicle can be
deleted at any time.

●BYD has no control over data
transferred to third parties (from the
use of third party content, in particular
as part of online services).

Integration of mobile devices

●Depending on vehicle configurations,
mobile devices can be connected
and controlled through the vehicle's
multimedia system.

●It may be necessary that the device's
screen or audio is displayed/played
through the multimedia system or
transmitted to it.

●Additional data like positioning or
vehicle information can be transmitted
through applications for use in certain
navigation systems, communication,
or other third-party services.

Page 28

The

specific

type of data processing

●

depends on the respective function

and is controlled by the user or third

parties such as the provider of the

devices or corresponding services.

Internet access and connected services

Depending on vehicle

configurations,

●

the Internet can be accessed for certain

functions or BYD services

through the vehicle's multimedia

system network devices.

BYD is not liable for any such services

●

provided by any other party.

In such cases, please obtain

●

information about the use of data from

the provider of the respective online

service.

Camera image recording/surrounding 
area monitoring

Your vehicle is equipped with a

●

number of cameras/sensors.

The reason for this is that some vehicle

●

functionalities require the vehicle's

path to be detected and assessed

which is done by cameras that detect

objects in the vehicle's surroundings

(e.g., obstacles).

The images are transmitted to the

●

respective control module for further

analytics required to operate the

systems.

Some images are just processed on

●

a volatile basis (RAM), others may

be stored, depending on vehicle

equipment.

The vehicle may be equipped with

●

an outward-facing camera (OFC) that

can be used to take footage of the

surrounding (dashcam).

The vehicle may also be equipped with

●

an inward-facing camera (IFC), which

can be used to take footage inside the

vehicle.

●Both OFC and IFC footage is stored.

●You are responsible to check the laws
of your residence if you turn the
camera on.

●Please be aware of corresponding laws
before turning on your OFC or IFC (for
instance, in some countries consent
is required for the use of IFC, and
in others OFC is strictly restricted to
dashcam purposes).

01

SAFETY

●For more camera details, see section
"Around View Monitor"P114 in this
manual.

Permanent Vehicle Transfer to Third
Parties and Offline Mode

●In case of a permanent vehicle transfer,
i.e., second hand vehicle, or vehicle
transfer by a third party for permanent
use, it must be noted that any
personalization/user settings made via
the multimedia system (e.g. address
list, navigation system, etc.) may be
accessed by the new owner.

REMINDER

●When the vehicle is scrapped or
transferred, it is recommended
that you restore the factory
settings to protect your privacy.

●You can also restrict your vehicle's
communication with the BYD data
server and the processing of vehicle-
related and personal data by setting
the vehicle to offline mode.

●On the multimedia touchscreen, tap

 to turn Wi-Fi off.

●This can also be done by: Tapping
System → System Settings → Interlink
→ WLAN → Off.

Page 29

Disclosure of Personal Data to
Authorities

●BYD discloses your personal data to
third parties only if this is legally
permissible or you have consented to
it.

●However, according to applicable
laws, government agencies may be
authorized to read data from the
vehicle (e.g., data can be read from
an airbag control unit to clarify an
incident).

●According to law, BYD may also
be obliged to disclose data
to governmental authorities in
your country/region upon request,
for example, during criminal
investigations.

Your Data Protection Rights

●BYD has staunch respect for its
customer's privacy, and strictly
complies with all data protection
laws, in particular the General Data
Protection Regulation (GDPR) and
applicable local laws.

●According to these laws, owners have
specific rights when their personal
data is processed:

●Data subjects have the right
of information and access, to
rectification, erasure of personal data
("right to be forgotten") and the right
to object to the processing of personal
data or to restrict it (or to withdraw
consent given earlier, as well as the
right to data portability).

●These rights may be limited in some
cases. For example, if we can show
that we have a legal obligation to
process your data, or if providing the
information to you would disclose
personal data about another person,
or if we are legally prevented from
disclosing that information.

●In some cases, this may mean that
we can retain the data even if you
withdraw your consent.

●For more information on data
processing, data protection, and any
rights you may have, please visit the
latest version of the Privacy Policy
available at the multimedia system
(Vehicle Settings → System Settings →
More → Privacy Policy).

Page 30

02

INSTRUMENT
CLUSTER

Instrument Cluster............................32

Page 31

Instrument Cluster

Instrument Cluster View

1
Electric driving mileage

2
Power meter

3
Time

4
The Area of Information Display

5
Gear status

6
Total range

7
Feedback mode

8
Speedometer

9
SOC

Page 32

Instrument Cluster
Indicators

Turn signal indicator

Hill descend control indicator*

High beam indicator

ECO mode indicator

OK indicator

AVH indicator (The indicator
shows white in standby status.)

Tire pressure fault warning light

Main alarm indicator

ABS fault warning light

ESC fault warning light

Seat belt reminder

EPB indicator

Position light indicator

02

Low beam indicator

INSTRUMENT CLUSTER

Rear fog light indicator

Sport mode indicator

Cruise control main indicator *

High-voltage battery low

Driving power limit warning
light

Smart key warning light

ESC OFF warning light

Headlight fault warning light

Airbag fault warning light

Parking system fault warning
light

Page 33

Steering system fault warning
light

Towing bike mode indicator

Low-voltage power system fault
warning light

High-voltage battery fault
warning light

Snow mode indicator

Outdoor exhibition vehicle
mode

Indicators and Warning Lights

 Parking system fault warning

light

This warning light is on in case of
low brake fluid level and brake system
fault. In any of the following cases, park
the vehicle in a safe place immediately
and contact a BYD authorized dealer or
service provider.

●This warning light comes on when the
ignition is switched on and the brake
fluid level is low;

●When the motor is running, this
warning light stays on if the brake fluid
level is normal and the EPB system
works normally (the EPB switch is
pulled up and released normally, and
there is no prompt of "Please check
the EPB system").

●The parking system fault warning light
and ABS fault warning light go on at
the same time.

Motor coolant overheating/low-
level indicator

High-voltage battery charging
connection indicator

High-voltage battery
overheating warning light

Powertrain fault warning light

Indoor exhibition vehicle mode

DMS indicator

REMINDER

●Momentary illumination of this
warning light during operation
does not indicate a problem.

 Seat belt reminder

If the safety belts of the driver and
the occupant are not fastened with the
power OK he indicator light of the safety
belt is not fastened until the driver and
the occupant fasten the safety belts,
otherwise the indicator light will continue
to light up.

 Charging system warning light

If this indicator is on during driving, it
indicates that there is a problem with the
charging. In this case, turn off the A/C and
fan, and drive the vehicle to the nearest
BYD authorized dealer or service provider
for maintenance.

Page 34

Steering system fault warning

light

●When the warning light stays on, it
indicates that the steering system is
faulty. In this case, drive the vehicle
to a BYD authorized dealer or service
provider for inspection.

REMINDER

●A motor is used to reduce the
force required to turn the steering
wheel.

●When turning the steering wheel,
you may hear the motor humming
when it is working. But it
does not mean that the motor
malfunctions.

●The duration of turning the
steering wheel to the limit
position does not exceed 5s.
Otherwise, the temperature
protection is activated, resulting
in heavy steering or damage.

●When the steering wheel is turned
frequently in situ for a long time,
the steering system fault warning light
does not go on, but it feels hard to
turn. This phenomenon is a non-failure
mode.

●If the steering wheel is turned
frequently in place for a long
time, the steering system boosting
effect will decrease to prevent over
temperature of the system, resulting
in heavy steering when operating the
steering wheel. In this case, avoid
frequently turning the steering wheel
or stopping the vehicle; the system
will return to normal in 10 min.

WARNING

●If the steering system fault
warning light goes on,
immediately park the vehicle
in a safe place and contact a
BYD authorized dealer or service
provider.

02

 Powertrain fault warning light

●If the powertrain is faulty, this warning
light goes on.

INSTRUMENT CLUSTER

●If any of the following conditions
occurs, it indicates a fault in a
component monitored by the warning
light system. In this case, contact a BYD
authorized dealer or service provider
for inspection as soon as possible:

●With the vehicle powered on, this
warning light stays on.

●This warning light turns on during
driving.

REMINDER

●Please do not drive the vehicle
with the warning light on. It is
recommended to drive to the
BYD authorized dealer or service
provider as soon as possible to
check and confirm the problem.

 High-voltage battery overheating

warning light

●If this indicator is on, it indicates that
the high-voltage battery is too hot.
Should this occur, stop the vehicle
immediately to let it cool down.

●The high-voltage battery may be
overheated under the following
operating conditions. For example:

●Long-distance climbing in hot
weather.

Page 35

●Long stop-and-go traffic state,
frequent rapid acceleration and
braking, or continuous running
without rest.

 High-voltage battery fault

warning light

●With the vehicle powered on, this
warning light stays on. If the power
battery system works properly, it
goes out after a few seconds. If the
system is faulty, it goes on again.
It is recommended to contact a BYD
authorized dealer or service provider
for inspection as soon as possible.

●If any of the following conditions
occurs, it indicates a fault in a
component monitored by the warning
light system. In this case, contact a BYD
authorized dealer or service provider
for inspection as soon as possible:

●With the vehicle powered on, this
warning light stays on.

●This indicator stays on or lights up
from time to time during driving.

 Smart key warning light

●Press the START/STOP button. If the
smart key is not inside the vehicle,
the warning light lights up for several
seconds, the speaker sounds once, and
the display screen displays "No key is
detected. Please confirm whether it is
inside the vehicle”.

●If the START/STOP button is pressed
with the smart key inside the vehicle,
this warning light does not light up,
and the vehicle can be powered on.

●If the smart key is brought into the
car within a few seconds when the
warning light is on, the warning light
goes out and can be powered on and
started.

●If the warning light flashes when
the START/STOP button is pressed, it
indicates low battery of the key.

 ABS fault warning light

●With the vehicle gear at OK, this
warning light stays on. If the ABS (anti-
lock braking system) works properly,
the light goes off in a few seconds. If
the system fails, it lights up again until
the fault is eliminated.

●When the ABS fault warning light is
on (the parking system fault warning
light goes out), the ABS does not work,
but the parking system still works
normally.

●When the ABS fault warning light is on
(with the parking system fault warning
light off), since the anti-lock braking
system does not operate, the wheels
will be locked in case of emergency
braking or braking on a slippery road.

●If any of the following conditions
occurs, it indicates a fault in a
component monitored by the warning
light system. In this case, contact a BYD
authorized dealer or service provider
for inspection as soon as possible:

●With the vehicle gear at “OK”, this
warning light does not light up or
stays on.

●This warning light turns on during
driving.

REMINDER

●Momentary illumination of this
warning light during operation
does not indicate a problem.

●If the braking fault warning
light and ABS fault warning
light go on at the same time,
immediately park the vehicle
in a safe place and contact a

Page 36

REMINDER

BYD authorized dealer or service
provider. Because if the brake
operation is performed at this
time, not only the ABS does
not work, but the vehicle also
becomes extremely unstable.

●If both the ABS indicator and the
braking system indicator are on and
the electronic parking brake (EPB)
is fully released, the braking force
distribution system of front and rear
wheels has also failed.

●Gently press the brake pedal to feel if it
is normal:

●If the brake pedal is normal, check
the level of brake fluid. If the liquid
level is low, it is recommended to
contact BYD Auto Authorized Service
Store in time to check whether the
brake system has leakage and the
wear degree of brake friction plates.
If the liquid level is normal, the
system is normal.

●If the brake pedal feels abnormal,
measures should be taken
immediately. It is recommended to
contact a BYD authorized dealer or
service provider for maintenance as
soon as possible.

 SRS fault warning light

●OKWith the vehicle powered on, this
warning light is on. If the airbag system
works normally, it goes out after a
few seconds. If the airbag system fails,
it is always on. This warning light is
used to monitor the SRS ECU, collision
sensor, inflator, warning light, wiring
and power supply.

●If any of the following conditions
occurs, it indicates a fault in a
component monitored by the warning

light system. In this case, contact a BYD
authorized dealer or service provider
for inspection as soon as possible:

●With the vehicle gear at “OK”, the
self-test of this warning light will not
be on or will be on continuously after
it is powered on.

●This warning light lights up or flashes
while driving.

02

 Tire pressure fault warning light

INSTRUMENT CLUSTER

With the vehicle gear at “OK”, this
warning light stays on. It turns off in a few
seconds if the tire pressure monitoring
system is working properly. If the system
fails, this warning light turns on again.

●When the tire pressure fault warning
light lights up or flashes and the
information display on the instrument
cluster reads "Please check the
tire pressure monitoring system", it
indicates that the tire pressure system
is faulty.

In any of the above cases, contact a BYD
authorized dealer or service provider for
inspection as soon as possible.

 ESC fault warning light

●With the vehicle gear at OK, this
warning light is on. If the airbag system
works normally, it goes out after a
few seconds. If the system fails, this
warning light turns on again.

●If the ESC fault warning light flashes
while the vehicle is traveling, it
indicates that the ESC is working.

●When the ESC warning light turns on
(with the ABS fault warning light and
the parking system fault warning light
off), the ESC fails, but the ABS and
the braking system continue to operate
normally.

Page 37

●When the ESC warning light turns on
(with the ABS fault warning light and
the parking system fault warning light
off), the ESC system does not work.
This means the vehicle is extremely
unstable at sharp turns or when the
driver steers away from obstacles
ahead.

●If any of the following conditions
occurs, it indicates a fault in a
component monitored by the warning
light system. In this case, contact a BYD
authorized dealer or service provider
for inspection as soon as possible:

●With the vehicle gear at “OK”, the
self-test of this warning light will not
be on or will be on continuously after
it is powered on.

●This warning light stays on during
driving.

●If the ESC fault warning light flashes
while the vehicle is traveling, it
indicates that the ESC is working.

REMINDER

●Momentary illumination of this
warning light during operation
does not indicate a problem.

●If thewarning lights of the ESC, the
ABS and the braking system are
on, immediately stop the vehicle
in a safe place and contact a
BYD authorized dealer or service
provider. Because the vehicle
becomes extremely unstable and
the ABS does not work when the
vehicle is braked.

 ESC OFF warning light

●With the vehicle gear at “OK”, this
warning light goes out after a few
seconds..

●When the "ESC OFF" button is pressed,
the light should illuminate and stay on
and the ESC system would not work.
When the "ESC OFF" switch is pressed
again, it shall go out, and the ESC
system functions normally.

REMINDER

●If the OFF warning light of ESC
is on, the driver must be vigilant
and keep driving at a low speed
when making emergency turns to
avoid sudden obstacles. Because
braking the vehicle in such a
situation may cause the ESC
system to malfunction and the
vehicle to become unstable.

 Driving power limit warning light

This light turns on when the high-voltage
battery is so low that the motor power is
limited.

 Main alarm indicator

If this indicator is on, it indicates that
there is a fault prompt or warning
information in the information display
area.

 Headlight fault warning light

When the warning light is yellow, it
indicates that the headlight is faulty. In
this case, drive the vehicle to a BYD
authorized dealer or service provider for
inspection.

Page 38

03

CONTROLLER
OPERATION

Doors and Keys.................................40

Seat................................................... 49

Steering Wheel..................................53

Wipers............................................... 57

Side Mirror........................................ 59

Switches............................................61

Page 39

Doors and Keys

Keys

Electronic Smart Key

Electronic smart key - Lock/Unlock all
doors by pressing the driver’s door
microswitch while carrying the electronic
smart key. Buttons on the smart key help
you lock/unlock doors, open the trunk lid,
perform a remote start, and locate your
vehicle.

Model: D0-92/D1-92

Operating power supply: button cell
battery

Battery Model: CR2032

Nominal voltage: 3V

Operating voltage: 2.9V~3.3V

Normal operating current: 8 mA (nominal
current)

Low frequency resonance frequency:
125KHZ

Key operating frequency: 434MHz

FCC ID:2A5DH-DAEA-92

① Indicator

② Lock button

③ Unlock button

④ Open Trunk Lid Button

⑤ START/STOP button

⑥ Mechanical Key

WARNING

●The button (coin) battery in the
vehicle key is hazardous and any
batteries must always be kept
away from children.

●If swallowed or placed inside any
part of the body, a lithium battery
can cause severe or fatal injuries
in 2 hours or less.

●Medical attention should be
sought immediately if it is
suspected the battery has been
swallowed or placed inside any
part of the body.

CAUTION

●The electronic smart key is
an electronic component. The
following instructions should be
observed to prevent damage to
the electronic smart key.

●Do not place the smart key
in a position exposed to high
temperature, such as on the
dashboard.

●Do not tamper with the smart
key.

Page 40

CAUTION

●Do not hit other objects with the
smart key or drop it.

●Do not inmmerse the key in
water or clean it in the ultrasonic
scrubber.

●Do not place smart keys
with devices that emit
electromagnetic waves, such as
the mobile phone.

●Do not attach any objects (such
as a metal seal) which cut off
electromagnetic wave signals
when using the card.

●You can register a spare key for
the same vehicle. In this case,
contact a BYD authorized dealer
or service provider immediately.

●If the electronic smart key cannot
operate the door within the
normal distance, or the key
indicator light is dim or off:

●Chekc for nearby radio stations
or airport radio transmitters
that interfere with the normal
operation of electronic smart
keys.

●The battery of an electronic
smart key may be exhausted.
Check the battery inside the
electronic smart key. It is
recommended to contact a BYD
authorized dealer or service
provider for inspection as soon
as possible.

Mechanical Key

Mechanical key (in the smart key) -
Unlock/Lock the driver's door. Insert the
mechanical key back into the smart key
when it is not in use.

●When using the mechanical key in the
electronic intelligent key, as shown in
the figure, press the "PUSH" button
② on the intelligent key and take out
the mechanical key in the direction of
arrow ①.

●After using the mechanical key, press
the "PUSH" button and insert the
mechanical key.

●The information shown here is for
reference only.

03

CONTROLLER OPERATION

Bluetooth Key*

Bluetooth Key*----Through the proximity
Bluetooth connection to the vehicle,to
realize the control of the vehicle,including
the control of the door unlocking,locking
and so on.

NFC Key

Locking:

With the ignition switched off and all
doors closed but not locked, place the
NFC phone close to the designated
area on the driver's side mirror to
simultaneously lock all the doors. The
turn signals flash once.

Unlocking:

●When the anti-theft system is
activated, carry the NFC phone close
to sensing area with the NFC mark
on the front right external mirror. All

Page 41

doors unlock simultaneously. The turn
signals flash twice.

●When the anti-theft system is
activated, please open the door within
30 seconds after unlocking with the
phone NFC. Otherwise, all doors will
relock automatically.

●After the phone NFC is used to unlock,
the user's start permission is provided
within a certain period of time, and the
permission is unlocked at the "OFF"
position.

●Place the NFC phone close to sensing
area with the NFC mark on the front
right external mirror does not work if:

●When opening or closing the door,
the phone NFC is close to the
command area on the front right
exterior rearview mirror.

●The vehicle is not powered off.

CAUTION

●Some smartphones do not
support the NFC key function.

●Please avoid long-term or
frequent use when the
smartphone is dead.

●Phone NFC uses near-field
communication technology,
requiring the identification
distance less than 2 cm. During
identification, it is recommended
to put the phone NFC close to the
exterior rearview mirror for 1-2s.

NFC Digital Key

NFC Digital Key Introduction

NFC is a digital key system provided by
BYD. It allows you to register your phone
or wearable device as your vehicle key,
and unlock, lock and start your vehicle
safely and easily.

●The following conditions are required
to use the NFC digital key. Please
ensure that all conditions are met
before using it:

●The vehicle has enabled the BYD Cloud
service;

●The vehicle is configured and supports
NFC digital key function;

●Relevant mobile phone or wearable
device supports BYD NFC digital key
function (please consult your BYD
distributor and provider for specific
supported device models).

Enabling NFC Digital Key

You can turn on through the BYD APP.
Before activating it, please enter the
vehicle with the physical key, start the
vehicle and keep it in “P” gear.

BYD APP:

●Please go to the mobile APP store
to download BYD APP, complete
registration and login. Click "NFC/
Digital key" and follow the prompts.

Enabling the NFC digital key with
wearable device

Wearable devices support Apple Watch
(for other wearable devices, please
consult the distributor and provider), it
can be enabled in any of the following
ways:

Sync the iPhone to the Apple Watch
after successful activation:

●Activate the iPhone digital key after
wearing the unlocked watch. After
the iPhone is successfully activated,
the prompts can be synchronized to
nearby Apple Watch to add the digital
key, and complete the activation steps
accordingly.

Watch APP activation:

●It applies to the case that the iPhone
digital key is not synchronized to the

Page 42

Apple Watch when it is activated.
Please open the Watch APP, select
"Wallet", find the corresponding key,
and click "Add" to complete activation
steps accordingly.

The Usage of NFC digital key

When using, please turn on the NFC
function switch of the device and use it
according to the following tips:

●Take the mobile phone/wearable
device with the NFC digital key and put
its NFC antenna area close to the NFC
identification of the outside rearview
mirror on the driver's side to unlock/
lock the vehicle (NFC antenna area,
please consult your device provider for
details).

●After entering the vehicle, please place
the mobile phone or wearable device
in the area where the mobile phone
NFC is opened, and then you can get
the vehicle start permission.

CAUTION

●Please start the vehicle as soon as
possible after obtaining the start
permission by using the mobile
phone NFC vehicle key. If the
vehicle is not started in time, it
is necessary to put the mobile
phone or wearable device again in
the area where NFC is opened to
obtain the start permission.

The Removal of NFC Digital Key

The digital key can be deleted in any of
the following methods:

Delete Digital Key in BYD App

●Open BYD APP to enter the digital key
management page, click the digital key
to be deleted, and enter the operation
password to complete the deletion;

Delete Digital Key in the Wallet

●Open the system wallet, find the digital
key card that needs to be deleted, and
complete the deletion according to the
system prompts.

Locking/Unlocking Doors

Locking/Unlocking with Mechanical
Key

Lift the outer handle of driver's door
upward, insert the key into the lock hole,
and turn it.

03

●Unlocking: turn the key
counterclockwise.

CONTROLLER OPERATION

●After the vehicle gets unlocked with
the mechanical key, it is necessary to
pull out the key and pull the outer
handle to open the door.

●Locking: turn the key clockwise.

●Close the driver's door, make sure
that it is flush with or lower than the
rear right door, press the door, and
turn the key clockwise to lock.

Opening with Interior Door Handle

●When the vehicle is unlocked, pull the
handle once to open the door from
inside the vehicle.

●When the vehicle is locked, pull the
handle twice to open the door from
inside the vehicle.

Page 43

Locking/Unlocking/Finding the Vehicle
with Smart Key

●The wireless remote control function
is used to unlock or lock all doors at
a short range and realize additional
functions.

●When carrying the registered smart
key into the activation area, press the
button on the key to lock or unlock all
doors.

Locking

●When the vehicle is powered OFF with
all doors and the hood closed, press
the lock button to lock all doors. The
turn signals flash once. Ensure that all
doors are locked securely.

●If any door is not closed, turn signals
do not flash, and the alarm sounds
once.

Unlocking

●Press the unlock button to unlock all
doors simultaneously. The turn signals
flash twice.

●If the vehicle is not powered off, the
doors cannot be unlocked/locked with
the unlock/lock button.

●When the smart key is used to unlock
all doors simultaneously, even if the
doors are not opened, if the "DOOR"
switch is turned on, the interior light
goes on for 15s and then goes out (the
user can slide down the status bar on
the top of the Multimedia touchscreen
to open the Quick interface and turn
on or off the "DOOR" switch).

●After unlocking the vehicle in anti-theft
mode with a intelligent key, open any
door within 30 seconds. Otherwise, all
doors lock automatically.

●If the lock or unlock button is pressed
and held, the locking or unlocking
function is not repeated. Release the
button and press it to realize the
function again.

Unlocking of the Boot Lid with the
Microswitch

Double press the unlocking button of the
smart key to open the trunk lid. Turn
signals flash twice.

●Anti-forget key function

●If the key is placed in the locked
vehicle and the boot lid is closed,
the vehicle will get unlocked
automatically and the turn signals
flash twice.

Vehicle locating

Page 44

●When the vehicle is in the anti-theft
state, if the lock button is pressed, the
vehicle makes a long sound, and the
turn signals flash 15 times. When the
vehicle cannot be found, this function
can be used to locate it.

●When the vehicle is in the vehicle
locating state, press the lock button
again to activate the vehicle locating
function again.

Unlocking/Locking Doors with
Microswitch

Locking

●With the ignition switched off and
doors closed but not locked, press the
microswitch on the front door handle.
All doors lock at the same time, The
turn signals flash once.

●If any door, the hood, or the trunk lid
is not closed, pressing the microswitch
still locks the closed doors, but the
horn only sounds once, and the turn
signals do not flash.

Unlocking

●In the anti-theft state, when carrying
the smart key into the activation
area, press the microswitch on the
front door handle to unlock all doors
simultaneously. The turn signals flash
twice.

●In the anti-theft state, please open
the doors within 30s after using

the unlocking function. Otherwise, all
doors are locked automatically again.

●Pressing the microswitch does not
unlock/lock doors in the following
cases:

●This is performed while a door is
being opened or closed.

●The vehicle is not powered off.

●The key is in the vehicle.

Rolling down

03

Press and hold the microswitch on the
front door handle to unlock the door and
open the window.

CONTROLLER OPERATION

REMINDER

●If the smart key is too close to an
exterior door handle or window,
it may not be possible to activate
the entry function.

●The function of opening/closing
the window by pressing and
holding the microswitch can be
turned on or off in infotainment
touchscreen → Settings → Locks
→ Windows. The information
shown here is for reference only.

Unlock the trunk lid with microswitch

●If the vehicle is in a locked state,
carrying a valid key and pressing the
"rear microswitch" will unlock the
trunk lid.

●If the vehicle is unlocked, pressing the
"rear microswitch" will open the trunk
lid.

Interior emergency unlocking of boot
lid

1. Remove the access cover of the trunk
lid lock from the lid guard.

Page 45

2. Unlocking of boot lid by toggling the
lever.

REMINDER

●When the entire vehicle is
powered off, the trunk can be
unlocked from inside the vehicle.

Locking/Unlocking with Central Lock

Locking or unlocking the vehicle with
the central locking

See P46.

Locking or unlocking doors
automatically

●All doors are automatically locked
when the vehicle speed is above 8
km/h.

●Press the START/STOP button to switch
the ignition off. Then, all doors unlock
automatically.

Locking/unlocking All Doors
Concurrently

●When the vehicle is not in the anti-theft
mode, the backlight of the central door
lock button turns on after the vehicle is
locked, and turns offt if the vehicle is
unlocked.

●Press the lock button of the
central door lock to lock all doors
simultaneously. At this time, the door
cannot be opened from the outside. To
open the door, pull the inner handle
once to unlock the door, and then pull
it again to open the door.

REMINDER

●All doors unlock automatically
when the vehicle suffers a strong
impact, depending on the impact
intensity and accident type.

Emergency Vehicle Locking with
Mechanical Key

●When the center console lock fails, use
the mechanical key to lock the driver's
door and turn emergency lock knobs
of right side doors anti-clockwise and
the knobs of left side doors clockwise
to the locked positions, and then close
these doors. The vehicle goes to the
locked state, and doors cannot be
opened with exterior handles.

●To unlock the doors, unlock the
driver's door with the mechanical key
first, then enter the vehicle, and pull
the inner handles of other doors. To
open these, pull their outer handles

Page 46

Or pull the inner buckle hand once to
unlock, and then pull it again to open
the door.

REMINDER

●Prevent excessive force from
distorting or breaking the key
during the operation.

Smart Access and Start
System

Entry Function

Use the smart key to unlock or lock the
vehicle doors. (For details, please refer to
P44 or P45).

●If the PEPS system does not work
normally and you cannot enter the
vehicle, the mechanical key concealed
in the smart key can be used to unlock
and lock the driver's door, or the
wireless remote control function can
be used to unlock and lock all doors.

Start-up Function

With the smart key inside, press the brake
pedal and the START/STOP button to start
the vehicle.

START/STOP Button

●Possible causes for the failure of
the normal start function when the
"START/STOP" button is pressed:

●Starting the drive motor repeatedly
in a short time requires the driver to
wait for 10s first.

●If the smart key does not work,
the smart key warning light on the
instrument cluster goes on, and the
information display screen on the
instrument cluster displays a prompt
about the low SOC of the key battery,

the battery SOC of the key may have
run out.

03

REMINDER

CONTROLLER OPERATION

The smart access and start system
may not work properly when:

●There is a strong electromagnetic
field nearby, such as TV towers,
power stations, and broadcasting
stations.

●The smart key is being carried
along with a communication
device, such as a two-way radio or
mobile phone.

●The smart key is in contact with or
covered by a metal object.

●The door handle is operated too
quickly.

●The smart key is too close to the
handle.

●Another wireless remote control
function is being used nearby.

●The battery runs out.

●The smart key is close
to highvoltage equipment or
equipment that produces noise.

●When the smart key is being
carried along with another
smart key or radio-wave-emitting
device,

Page 47

REMINDER

●even in the activation area, the
smart key may not work normally
in some positions (e.g., on the
dashboard, in the glove box, or on
the floor).

Antenna Position

① Interior detection antenna

② Exterior detection antenna (Driver side
antenna*)

Activation Area

The PEPS function takes effect only when
the registered intelligent key is in the
activation area.

① The entry function activation area
(driver side antenna)* is about 1 m away
from the door handles on driver side and
the external boot lid release button.

② The start function activation area is
located in the compartment.

●If the intelligent key of the vehicle
is near the intelligent keys of other
vehicles, it may take a bit longer than
usual to unlock the doors, which is
normal.

●If the electronic smart key indicator
does not flash, and the vehicle cannot
be started with the start function, the
battery may be exhausted, it should be
replaced as soon as possible.

Power Saving of the Smart Key

●Communication between the key and
the vehicle occurs even when the
vehicle is parked. Therefore, do not
leave the key in the vehicle or within
2 m from the vehicle.

●If the smart key receives strong
electromagnetic waves for a long time,
the battery runs out rapidly. The smart
key must be kept at least 1 m away
from the following equipment:

●TV set

●Personal computer

●Mobile phone charger

●Light stand

●Fluorescent light

Child Protection Lock

Child protection locks are designed to
prevent children in rear seats from
accidentally opening rear doors. Such
locks are provided on the sides of the left
and right rear doors.

The door cannot be opened from inside
the vehicle while the latch is locked. To
open this door, use the exterior handle.

Page 48

CAUTION

●Before driving, especially when
a child is in the vehicle, ensure
that the doors are closed and the
child protection lock function is
enabled.

●Proper use of seat belts and
activation of child protection lock
helps prevent the driver and
passengers from being thrown out
of the vehicle in an accident, and
also prevents a door from being
opened accidentally.

Seat

Seat Precautions

●Adjust the driver's seat so that the
pedal, steering wheel and dashboard
controller are easy to control for the
driver.

●During driving, the most effective
protective measure is to keep the seat
backrest upright, always lean on the
backrest and adjust the seat belt to a
proper position.

●Do not fold in the rear seats during
driving.

●Secure the baggage properly to
prevent it from sliding or moving. Do

not place baggage higher than the seat
backrest.

WARNING

●Do not sit on the upper part of
the folded seat backrest or on the
goods. Otherwise, people may be
seriously injured due to improper
sitting on the seat or improper
fastening of the seat belt in case
of emergency braking or collision.

03

●Do not place objects under
the seat to avoid affecting
the seat locking mechanism
or accidentally pushing the
seat position adjustment lever
upward, resulting in sudden
movement of the seat and loss
of control of the vehicle by the
driver.

CONTROLLER OPERATION

●When adjusting the seat, do not
put your hands under the seat or
near the operating parts to avoid
injuries.

●After adjusting the seat backrest,
lean back to confirm that it
is locked. If not fully locked,
personal injury may be caused
in case of an accident or sudden
braking.

●Do not lay down the seat backrest
when the vehicle is moving. As
the upper shoulder strap of the
seat belt cannot be properly
attached to the body, in case
of an accident, the driver and
passengers may hit the shoulder
strap, causing serious injuries to
the neck or other parts, or slide
out of the lap portion, causing
serious injuries.

●During driving, no one is allowed
to sit in the boot area or on
the folded seat. Using these
areas without proper protective

Page 49

WARNING

measures may cause serious
injuries in case of an accident or
sudden braking.

●Do not adjust the seat while
the vehicle is in motion, as
unpredictable seat movement can
cause the loss of vehicle control at
this time.

●Do not drive the vehicle until the
passengers are properly seated.

●Before laying the rear seats down,
check the positions of the rear
headrests and the front seats, to
avoid interference among the rear
seats, the front seats and central
passage.

REMINDER

●Please do not damage the seat
belt when folding the rear seats,
and check that the buckle is
properly placed in the buckle card
slot on the seat cushion.

●Please adjust the seat to the
proper position before fastening
the seat belt.

●When adjusting the seat, be
careful not to let the seat hit
passengers or baggage.

●During the measurement of seat
cushion depth, the front and rear
positions of the seat are the
rearmost positions of the slide
rail, and the design angle of the
backrest is 23°.

●During the measurement of seat
cushion width, adjust the backrest
angle to the designed state (the
backrest angle of the second
row seats is 27°), and adjust the
seat slide rail* to the rearmost
position. For the separable and

REMINDER

combinable seats in the same row,
measure the cushion width as a
whole row of seats.

Adjusting Front Seats

Front Seats - Electric Adjustment*

Electrical front seat adjustment includes
the adjustment of front and rear distance,
seat cushion height*, and backrest angle.
There are the following adjustment
methods according to the functions
equipped with the actual vehicle.

② Seat Adjustment Switch

●Move this switch forward or backward
to slide the seat forward or backward.

●Move the rear end of the switch up or
down to adjust the height of the seat
cushion*.

① Seatback angle adjustment switch

●Push this switch forward or backward
to adjust the backrest angle.

REMINDER

●Releasing the switch stops the
seat in this position. Do not
place anything under the seat as

Page 50

REMINDER

this may prevent the seat from
operating.

Adjusting Front Seats Manually*

The manual adjustment of front seats
includes the adjustment of front and
rear distance and backrest angle. There
are the following adjustment methods
according to the functions equipped with
the actual vehicle.

Seat position adjustment lever

●Hold the middle of the adjustment
lever and pull it up, then slide the seat
back and forth to the desired position
with slight body pressure, and then
release the lever.

●After adjusting the seat position
forward and backward, slide the seat
back and forth to ensure that a slide
rail locking sound is heard and confirm
that the seat is locked in place.

Backrest Adjustment Handle

●Pull up the adjustment handle, lean
the backrest forward or backward
with your back, adjust the backrest to
the desired position, and release the
handle.

Seat heating*

03

●The heating system enters the relevant
setting interface through the seat
heating control module of the air
conditioning interface to turn on or off
the seat heating system.

CONTROLLER OPERATION

Heating system adjustment

●Seat heating: The user controls the
gear of seat heating by operating
the heating switch on the multimedia
touchscreen. The heating system of
the driver and front passenger seats is
controlled separately, and the heating
function is divided into two gears:
1 and 2. At the same time, the
drop-down menu interface of the
touchscreen also has a heating control
button, which can also be used to
adjust the seat heating function.

●The heating indicator is off by default
after each power-on.

●When the switch is touched for the
first time, the seat heater operates in
the second gear, and the second gear
icon lights up.

●If the switch is touched for the
second time, the seat heating is
adjusted to the first gear, the second
gear icon is off, and the first gear icon
is on.

●Touch the switch for the third time to
turn off the heating function, and the
icons of gear 1 and gear 2 are all off.

Page 51

Folding Rear Seats

To fold in the rear seat backrest, pull up
the folding webbing on the rear seats.

REMINDER

●Please fold or unfold the rear
seats at a moderate speed. Avoid
quickly lowering or pulling up
seatbacks to prevent damage to
or malfunction of rear seats and
the seat belts.

●When unfolding a rear seat, do
not push the seatback hard;
otherwise, the seatback will be
pre-stressed and impossible to
unlock.

●When unfolding a seatback, check
that the buckle position is proper
to expose the reserved opening
on the seat.

●Do not turn over the seat when
the seat belt latch is inserted into
the buckle.

Rear Seat Head Supports

1. Lifting headrests

Pull up the headrest to the desired
position in the direction of the headrest
rod, and release it after hearing a "click".

2. Lowering

Press and hold the headrest height
adjustment button to lower the headrest
to a proper position, and then release this
button.

3. Removing a head support

Press and hold the headrest height
adjustment button to pull out the
headrest, and then release this button.

4. Installation

Insert the headrest links into the bushing
with the groove facing forward. Press
and hold the headrest height adjustment
button to lower the headrest to a proper
position, and then release this button.

REMINDER

●Headrests protect vehicle
occupants from head and neck
injuries. Adjust the headrest so
that its center aligns with the
back of your head for maximum
protection. Adjust the head
support to the proper position
based on your actual height.

●When adjusting head support
height, align the occupant's ear
tip line with the center line of the
head support.

●After adjusting the head support,
ensure that it is locked into
position.

Page 52

REMINDER

●Do not drive the vehicle without
headrests.

●Do not attach any object to the
headrest lever.

Steering Wheel

Adjusting the Steering
Wheel

To adjust the steering wheel position,
hold it and operate as follows:

●Press the adjustment handle
downward to tilt the steering wheel to
the desired position, and then restore
the handle to the locking position.

WARNING

03

●Never adjust the steering wheel
while driving, as this is under risk
of impaired vehicle control, which
can lead to accidents.

CONTROLLER OPERATION

●After adjusting the steering wheel,
move it up and down to verify that
it is securely locked.

Steering Assist Mode Settings

●The hand feeling of steering assist
differs among people, and different
users have different evaluations and
demands on the feeling.

●Choose Comfort/Sport steering mode
by going to the infotainment
touchscreen→ Vehicle → Driving
Control → Steering Assist Mode.

Page 53

REMINDER

●When the vehicle is running at
high speed, if the steering wheel
feels light, it is recommended that
you set the steering power mode
to sport mode.

1
Panoramic view button

2
Customize Keys

3
Adaptive Cruise Control (ACC)
Switches

4
Distance + button

5
Scroll button

6
Distance - button

7
Intelligent Cruise Control (ICC)
System Switches

Left buttons

Panoramic view button

Steering Wheel Switches

8
Call

9
Voice recognition button

10
Right buttons

11
“MODE” Button

12
Scroll button

13
Instrument cluster/Back

14
Left button

●Turns panoramic view off if already in
panoramic view mode, or on if not in
panoramic view mode.

Page 54

Custom button

●Press and hold this button to
display the customization interface.
Customized functions include the
rotating Multimedia touchscreen,
radio, music and air conditioning
functions*.

●If the custom button has been
customized to a certain function,
press this button to activate the
function, and press and hold this
button to display the customization
interface to customize again or cancel
customization.

Distance +

●Adjust the distance from the vehicle
ahead in the following function and
increase one level.

Adaptive Cruise Control (ACC) Switches

●+

●Pull up the lever and press this
button to increase at a certain speed;
Press and hold it to continuously
increase the speed. Activate the
cruise control system and resume to
the previously set speed.

●-

●Pull down the lever and press
this button to decrease at a
certain speed; Press and hold it to
continuously decrease the speed. Set
the current speed to the target cruise
speed.

Distance - button

●Adjust the following distance to the
vehicle ahead in the following function
and decrease one level.

Intelligent Cruise Control (ICC) System
A/C ON/OFF

●Press this button to deactivate/activate
the ICC status.

Right buttons

Phone button

●Press to make/receive a call. (The
multimedia system is muted after
pressing this button.)

●When the system is in a Bluetooth
unrelated interface and Bluetooth is
disconnected, press this button for
the system to skip to the Bluetooth
Connected interface. If Bluetooth is
connected, press this button for the
system to skip to the main dialing
interface.

03

CONTROLLER OPERATION

●When a number is input in the dialing
interface, or an entry from the Call
History or Contacts is selected, press
this button to start dialing.

●While under the main dialing interface
with Bluetooth connected and no
number input, press this button for the
system to directly skip to the Outgoing
Calls interface under the Call History
interface. Press it again for the system
to automatically call the first entry in
the Outgoing Calls interface.

Voice recognition

●Press this button to switch the
Multimedia touchscreen to the voice
recognition interface and realize the
voice function.

Left/Right buttons

Multimedia system

●In radio mode:

●Press 

 to play the previous radio

station.

●Press 

 to play the next radio

station.

●In USB/Bluetooth music/third-party
music APP and other modes:

Page 55

●Press 

 to play the previous track

(track number -1).

●Press 

 to select the previous

entry in the Bluetooth Call History
and Contacts interfaces.

●Press 

 to play the next track

(track number +1).

●Press 

 to select the previous

entry in the Bluetooth Call History
and Contacts interfaces.

Instrument cluster

●In instrument cluster menu mode:

●Press 

 to switch it to a left menu

and its submenus.

●Press 

 to switch it to a right

menu and its submenus.

“MODE” Button

●Mode selection: press the mode
button to switch between media
applications, peripheral applications
and pre-installed third-party audio and
video applications.

Roller

Multimedia system

●Roll up the roller: increase the volume
in a single step until the maximum
volume (12 gears in a circle).

●Roll down the roller: decrease the
volume in a single step until the
minimum volume (12 gears in a circle).

●Press the roller downward: mute
function.

Instrument cluster

●Roll up the roller:

●Select the secondary/tertiary menu
items upward in the instrument
cluster menu mode.

●Roll down the roller:

●Select the secondary/tertiary menu
items downward in the instrument
cluster menu mode.

●Press the roller:

●In the instrument cluster menu
mode, enter the menu next to the
current option or confirm the current
setting.

Instrument cluster menu/return button

●When the instrument cluster is not
in menu mode, press this buttonto
display the menu on the instrument
cluster.

●When the instrument cluster is in menu
mode, press this button to return to
the upper-level screen, or to exit the
menu if there is no upper-level screen.

●On the Bluetooth call screen, press it to
end the call.

Horn Button

Press the pad to sound the horn.

Page 56

CAUTION

●Avoid pressing honking for too
long, as the horn may be
damaged.

REMINDER

●Observe the traffic laws and use
the horn properly.

Wipers

Wiper Switch

●This lever is used to control the
windshield wipers and washers. It has
five modes:

 : High-speed wiper mode

●

 : Low-speed wiper mode

●

 : Auto Wipers/Intermittent

●

 : Stop

●

 : MIST level

●

●To select the level, move the lever
upward or downward.

●At low- and high- speed modes, the
wiper operates continuously.

●To let wipers work in the spot-wiping
mode “ 

 ”, pull the lever from the

“ 

 ” position. In this mode, the
front windshield wipers operate at a
low speed until the lever is released.

Auto Wipers/Intermittent

●The rain sensor automatically controls
the operation mode of wipers based on
the rainfall, and it is located in front
of the interior rearview mirror on the
front windshield inside the vehicle.

03

●To activate the automatic wiper
function, turn the switch to the
automatic wiper mode, and enable the
function with the "Automatic Wiper"
button via touchscreen 

CONTROLLER OPERATION

 → Settings
→ Vehicle → Confort Driving → Auto
Wiper.

●To activate the wiper intermittent
mode, turn the switch to the
automatic wiper mode, and disable
the automatic wiper function with the
"Automatic Wiper" button via 

 →
Vehicle Settings → Greeting from the
touchscreen.

●The automatic wiper function has four
sensitivity levels. The higher the lever,
the higher the sensitivity. When using
the automatic wiper function, change
the sensitivity by adjusting the toggle
based on real-time rain conditions. If
the wiper reacts to rain too quickly,
reduce the sensitivity; if the wiper
reacts to rain too slowly, increase the
sensitivity.

Page 57

Front Windshield Washer

●To clean the front windshield, please
pull the wiper lever backward (towards
the steering wheel). In this case, the
washer sprays water all the time, and
the wiper works simultaneously.

●The front windshield wiper wipes once
after the current wiping if the wiper
lever is held for less than 1 s, and twice
if more than 1 s.

CAUTION

●Due to differences in vehicle
equipment, the specific details
of wiper function vary between
vehicles.

REMINDER

●Check the wiper blade regularly to
remove the dirt on it.

●If the wiper is turned on as soon
as it rains, rainwater mixing with
sand and dust will not clean the
windshield, but cause a blurred
vision in an instant, affecting
driving safety.

●Use cleaning agent for glass. The
use of water or other types of
detergent may cause damage to
the washer motor.

Replacing Wiper Blades

Inspect wiper blades for cracks or partial
hardening at least every six months. If
any of these are found, the wiper blades
should be replaced.

Replacing Wiper Blades

The user can go to Multimedia system
→ Vehicle Health →Overhaul to activate
the wiper maintenance function. After the
function is activated, the wiper runs to
a high position and then stop, so as to
facilitate maintenance and replacement
of the wiper. After maintenance, the
wiper returns to the reset position
after the wiper maintenance function is
deactivated.

1. Lift the rear wiper arm from the rear
windshield to a certain angle.

2. Remove the wiper blade by pushing
it downward to disengage from the
wiper arm joint.

3. Install the new wiper blades through
the opposite order.

CAUTION

●Do not open the hood when the
wiper arms are pulled up.

●Lower the wipers slowly and avoid
direct impact onto the windshield.

Page 58

CAUTION

●Do not bend the wiper blade, and
do not obstruct the wiper blade
when the wiper is in operation.

Side Mirror

Interior Rearview Mirror

Manual Anti-glare Function

The interior rearview mirror can be
adjusted to two positions, suitable for day
and nighttime respectively. The nighttime
driving position reduces the glare from
vehicles in the rear.

●For daytime driving - adjust the control
lever to position ①, where the image
on the rearview mirror is the clearest.

●For nighttime driving - adjusting the
control lever to position ② helps
reduce the interference from the cars
behind. Remember that rear view
image clarity decreases when glare is
reduced.

Adjusting the Rearview Mirror Manually

Move the interior rearview mirror up or
down, left or right to a suitable position.

WARNING

03

●Adjusting interior rearview mirrors
before driving. Do not adjust the
interior rearview mirrors while
driving. This may distract your
attention, causing accidents.

CONTROLLER OPERATION

●Do not hang heavy objects on the
interior rearview mirror, or shake
or pull it vigorously.

●When the interior rearview mirror
gets stuck, do not adjust it
violently by hand, as this may
cause it to fall off.

Side Mirrors

Side Mirror Adjustment

The driver can adjust the electric side
mirror via its switch to a position where
the driver can just see the side of the
vehicle in the side mirror.

Selection button

 Left side mirror adjustment button

●

 Right side mirror adjustment
button

●

Adjustment button 

Press this button to adjust the side
mirrors to a proper position.

Page 59

REMINDER

●If the side mirrors get frozen,
do not operate the controller or
scrape their surface. Deicing spray
should be used.

Manually adjust the side mirror

Press the edge of the mirror by hand to
rotate the mirror around the center and
adjust it to a proper position.

Folding Side Mirrors

Side Mirrors Manually Folding*

Press the outer edge of the side mirror
hard to rotate the mirror body around the
folding shaft to the locking position.

Side Mirrors Electric Folding*

●Press the 

 button to fold the

external rearview mirror electrically
and press it again to unfold it.

●When the anti-theft function is
activated, the two external rearview
mirrors fold automatically.When the
anti-theft function is released, they
unfold automatically.

REMINDER

●Adjusting side mirrors before
driving. Do not adjust the side
mirrors while driving. This may
distract your attention, causing
accidents.

●Using the side mirror electric
heating defrosting function for a
long time may cause the mirror
to wear out faster. Turn off the
defrost button when it is not
needed.

Page 60

Switches

Light Switches

Rotate the knob at the end of the light
switch to 

 to turn off all lights (except
for daytime running lights).

Auto Lights

 ". BCM collects
the brightness value acquired by the light
intensity sensor and automatically turns
on/off position lights and low beams.

Turn this knob to " 

Clearance Light

 to turn on position
lights.

Turn this knob to 

Low Beam

03

 to turn on the low
beams.

Rotate this knob to 

CONTROLLER OPERATION

Rear Fog Light

Rotate this knob to 

 and rotate the fog

 to turn on the rear fog
lights.

light knob to 

Overtaking Light

Pull up the light switch handle (toward
the steering wheel) to turn on the
overtaking light. Release the handle for
the light switch to automatically reset.
The overtaking light turns off.

Page 61

High Beam

Turn the knob at the end of the light
switch to the " 

 " position, turn the
switch away from the steering wheel to
turn on the high beam, and turn off the
high beam again.

Turn Signal

●Push up the light handle to signal
right turn.The right turn signal and
its indicator on the instrument cluster
flash.

●Push down the light switch lever, and
then the left turn signals and the
turn signal indicator on the instrument
cluster start flashing simultaneously.

●After turn signals are turned on, they
flash continuously even if the light
switch is released. Turn signals go out
automatically after the vehicle finishes
turning the corner. Because of different
driving habits for drivers, the light
switch needs to be rotated for a round
to reset in some extreme cases.

Auto Off

●Conditions for enabling the auto off
function: Conditions for enabling the
auto off function: This function is
enabled when the light switch is
rotated to the 

 , and the
power supply is switched from "Start"
to "Stop".

 or 

●With the auto off function activated, if
the right door is closed, this function
automatically turns off headlights and
position lights after 10 s.

●With the auto off function activated, if
the right door is opened, this function
automatically turns off headlights and
position lights after 10 min.

●After auto off, if the light mode
changes, lights will be turned on
according to the new state. If the
conditions for enabling the auto off
function are met after that, the auto off
function will be activated again.

●Disabling the auto off function: After
the vehicle is powered on, the auto off
function is disabled, and the light knob
can be operated normally.

Page 62

●The auto off function turns off the
lights. If the anti-theft state is activated
and then deactivated, the lights turned
off before are automatically turned on
again. If the right door is not opened,
this function turns off the lights again
after 10 s. If the door is opened, the
auto off function turns off the lights
after 10 min.

Lighting delay function

●Highlights after Exit:

●The user can go to the "Follow me
home delay" setting interface via
the Multimedia → Vehicle settings →
Light & ambient to set the time of
follow me home. The default time is
10 s. When the light switch is rotated
to the 

 position, and
the owner powers off the vehicle,
locks the four doors, and tries to
leave the vehicle, the corresponding
lights continue to light up for 10 s
(or a set time) to provide the lighting
source.

 , 

 or 

●Headlights before Enter:

●The user can go to the "Follow me
home delay" setting interface via
the Multimedia → Vehicle settings
→ Light & ambient to set the time
of follow me home. The default
time is 10 s. When the light switch
is rotated to the 

 , 

 or 

position, and the owner unlocks the
vehicle and tries to get close to it,
the corresponding lights continue to
light up for 10 s (or a set time) to
provide the lighting source.

CAUTION

●The lighting on and off time
can be changed through the
multimedia interface → Light →
Welcome Light interface.

Driver's Door Switches

Power Window Switches

●The front left door is equipped
with four switches to correspondingly
control the four windows.

●There are two gears of window
control.

03

CONTROLLER OPERATION

Automatic operation

●Rolling down: press the button to
the second position and release it to
automatically roll down the window.

●Rolling-up: pull up the button to the
second position and release it to
automatically roll up the window *.

●To stop the window at its current
position, slightly operate the switch
once in the direction opposite to the
rolling direction.

Manual Rolling

●Rolling down: press the button to
the first position and hold it to
continuously roll down the window.

●Rolling-up: pull up the button to
the first position and hold it to
continuously roll up the window.

Delay Function

●After the power withdrawal, if the
front door is not opened, the four-
door window control switch has a
lifting delay function of about 10min

Page 63

and can continue to operate the
window lifting. During this period, if
the front door is opened and the delay
function is cancelled, the four-door
window control can no longer allow
the window lifting.

WARNING

●Before closing a power window,
ensure occupants' hands are not
placed upon the window glass;
pinching of hands or fingers can
result in serious injuries.

Right Front Window Anti-pinch*

When the window is obstructed by a
person or an object while rolling up, it
stops and rolls down to allow for the
obstruction to be removed.

Failure of automatic rising function and
anti-pinch function of window

●If the low-voltage battery is
disconnected while a window is being
rolled up or down, the automatic
rolling-up and anti-pinch functions
both cease to work. The initialization
shall be performed as follows:

●Pull up and hold the window switch
so that the window glass reaches the
top position and stalls there for 0.5
seconds.

●In models equipped with the one-
press closing function, if the window
is almost closed and the upper
window edge undergoes certain
resistance, the window moves back
down to prevent pinching.

WARNING

●Excessively frequent activation of
the right front anti-pinch function
can activate the regulator motor's
overheat protection.

WARNING

●Never try to deliberately
activate the right-front anti-pinch
function.

CAUTION

●The right front anti-pinch function
may not work if an object is
jammed into the window when it
is almost completely closed.

●Contacting a BYD authorized
dealer or service provider for
maintenance is recommended if
the windows' automatic closing
function or right front anti-pinch
function is not working normally.

Central Door Lock

The front left door is equipped with
buttons for locking and unlocking all
doors.

Locking

Press the central lock button to lock all
doors. Once doors are locked, the button
indicator goes on.

Unlocking

Press the central unlock button to unlock
all doors. Once doors are unlocked, the
button indicator goes off.

Page 64

Window Lock Button

●When the window lock button is
pressed, the red indicator of window
lock goes on. Only the switch on the
driver's side can control the window
regulation of four doors, while the
rear window switch cannot control the
window regulation.

●When this button is pressed again, the
red indicator of window lock goes out,
and the rear window switch returns to
normal operation.

Window Control Switch
on Passenger Side

When the ignition is on, use the front
left and rear door window switches to
operate the respective windows.

Odometer Switch

●Press the "ODO/TRIP" button to switch
ODO -- TRIP A -- TRIP B -- ODO.

The instrument cluster simultaneously
displays all corresponding mileages.

●Mileage information is cleared.

Driver Assistance
Switches

Mode Switch Group

Roll the roller switch to the eco/normal/
sport modes.

03

CONTROLLER OPERATION

Snow Mode Switch

●Roll the roller switch up to activate this
mode. Roll the roller switch down to
exit this mode.

●This mode is recommended for firm
roads covered with a layer of loose
and slippery substances such as
grass, snow, ice, or gravel.

●Although snow mode optimizes
traction, driving performance, and
maneuverability, it is recommended
to avoid sudden acceleration or high
speed.

CAUTION

●ESC system may limit the vehicle's
torque. Therefore, temporarily
shutting down the system may
help if the vehicle skids and
gets stuck in soft snow. The
ESC system must be restarted
after conditions are back to

Page 65

CAUTION

normal (see P123ESC operation
instructions).

Hazard Warning Light
Switch

Roll the roller switch up or down 

 ,

all turn signals start to flash, and the turn
signal indicator on the instrument cluster

flashes synchronously. Roll it again 

to stop flashing.

Interior Light Switch

In any power mode, turn on front interior
lights by touching their covers.

REMINDER

●When the vehicle is powered on
any gear and the "DOOR" switch
is turned on, the interior light
switches from high to low light
if this switch is pressed with the
door open.

●When the vehicle is powered off
and the "DOOR" switch is turned
on, the light goes out after a
period of time if the door is
opened.

Page 66

04

USING AND
DRIVING

Charging/Discharging...................... 68

Battery...............................................82

Usage Precautions............................86

Starting and Driving..........................92

Driver Assistance............................ 101

Page 67

Charging/
Discharging

Charging Instructions

●The charging equipment is a high-
voltage electrical device. Minors are
prohibited to charge or touch it. Keep
minors away from the vehicle when
charging.

●Charging may affect medical or
implanted electronic devices. Consult
the device manufacturer before
charging.

●Charge the vehicle in a relatively safe
environment, and avoid charging in
damp areas, or areas with fire or heat
sources.

●Protect the charging equipment
against water contact on rainy days.

●Before charging:

●Ensure that power supply
equipment, charging connector,
charge port, and charging connection
device are free of defects, such as
cable wear, rusted ports, cracked
casings, or foreign objects in the
ports.

●Do not charge the vehicle when the
charging connector's or port's plug,
socket, or metal terminals are loose
or damaged by rust or corrosion.

●When there is obvious staining or
moisture on the charger/charging
port and the power plug/outlet,
please wipe it with a dry, clean cloth
to ensure that the joint is dry and
clean.

●Use only certified charging equipment
specifically designed for electric
vehicles and consistent with applicable
national standards:

●To avoid charging failure or fire, do
not modify, disassemble, or repair
the charging equipment and related
ports. Contact a BYD authorized
dealer or service provider for
handling if there is a fault.

●Uncertified products are strictly
prohibited.

●Ensure that your hands are properly
dry before charging.

●If anything abnormal is found in
the vehicle or charging equipment
when charging, stop immediately and
contact a BYD authorized dealer or
service provider.

●Always observe the following charging
precautions to prevent damage to the
vehicle:

●Do not shake the charging connector,
otherwise the vehicle charge port
may be damaged.

●When there is a thunderstorm, it
is recommended not to charge the
vehicle. Lightning strike may cause
damage to the vehicle and personal
injury.

●Do not open the hood for maintenance
while charging.

●After charging, do not disconnect the
charging equipment with wet hands or
while standing on any wet surface.

●Before driving, check that the
charging equipment is disconnected
from the charge port and the charge
port door is closed.

Charging Precautions

●When the SOC bar on the
instrument cluster turns red, the
high-voltage battery is about to
be exhausted. Please charge it
immediately, otherwise the service life

Page 68

of the high-voltage battery and your
driving experience will be affected.

●Precautions for avoiding damage to
charging equipment:

●Prevent the charging equipment
from any mechanical impact, such
as falling and colliding with other
objects.

●Do not place the charging equipment
near heaters or other heat sources.

●Before charging:

●Make sure that the charging
connector and charge port are
free of foreign objects, and that
the protective cap of the charging
connector terminal does not get
loose or deformed.

●Hold the charging connector, align
the connector with the charge port
and push it in, making sure that they
are properly connected.

●When charging is complete:

●Stop charging first and make sure the
charge port is unlocked.

●Pull out the charging connector.

●Do not force the charging connector
out while the charge port is locked,
otherwise the charge port may be
damaged.

●Never drop the equipment or move it
by pulling it directly by the cable. Take
caution when moving the equipment.

●AC or DC charging is available in any
power mode. To ensure safety, it is
recommended to power off the vehicle
before charging.

●The A/C can be used as normal while
the vehicle is being charged. To ensure
the charging power, it is recommended
not to turn on the A/C.

●The vehicle should be parked in a
ventilated area, and there should not
be any occupant inside when charging.

●When the power battery is fully
charged, the system will automatically
stop charging. When the battery power
is extremely low, to extend the service
life of the power battery and improve
the success rate of charging, it is
recommended that you prioritize using
an AC charging station to charge your
car, or use a DC charging station with
a minimum output voltage of 150
V (or lower). As the charging port
is equipped with an electronic lock,
please pull out the charging plug after
unlocking.

04

●When DC charging is finished, turn off
the charging pile and then disconnect
the charging post. When household
portable AC charging is charged,
disconnect the vehicle charging
connector and then disconnect the
power plug at the power supply end.

USING AND DRIVING

●When charging is complete and the
charging connector is unplugged,
make sure that the charge port's cap
and door are closed, otherwise water
or foreign materials may enter the port
and affect its normal use.

●Before starting the vehicle, make sure
that the charging equipment has been
disconnected. If the chargr is not fully
inserted, the vehicle may be able to
run in gear, resulting in damage to
both the charging equipment and the
vehicle.

●Battery temperatures that are too low
or too high can compromised vehicle
charging performance.

●In the case of low-temperature
charging, battery thermal
management can improve the
lowtemperature charging ability, but
the charging time is prolonged and
the heating power consumption

Page 69

is increased. These are normal
phenomenons.

●In the event of low-temperature
DC charging under a high SOC,
the charging current is low due to
the low-temperature characteristics
of the battery. Therefore, at a low
battery mode, it is recommended to
charge the vehicle under a low SOC
to improve the charging speed.

●In cold regions, it is recommended
to charge the vehicle indoors with
heating.

●In hot regions, it is recommended
to charge the vehicle in a cool and
ventilated place.

●A/C turned on during low temperature
charging can affect the performance
of battery temperature control system
and charging performance.

●It is normal that when the battery
temperature control system is working
during charging, the charging power
displayed on the instrument cluster
may fluctuate temporarily.

●Before charging is completed, battery
equalization is activated to improve
the service life, which may prolong the
charging time.

●In case of high-temperature high-
power DC charging, the performance
of battery temperature control system
may be affected by the A/C in
the passenger compartment, and the
charging performance may degrade,
resulting in an extended charging time.
To ensure charging efficiency, it is
recommended to keep the A/C off
during charging.

Fault
Possible Causes
Solutions

Charging
cannot be
started. The

High-voltage battery
fully charged
When the high-voltage battery is fully charged,
the charging will stop automatically.

●When the heating or cooling function is
enabled during charging, it is normal
that both charging time and power
consumption increase slightly.

●During charging, battery cooling
may start, and the compressor, fan
and other components work when
necessary. It is normal that there will
be some noise under the hood.

●During charging, the estimated
remaining time to full charge
is displayed on the instrument
cluster or the multimedia. The
remaining time for a full charge may
vary depending on such different
conditions as temperature, SOC, and
charging facilities. It is normal for
the instrument cluster to display
“Calculating ..." before charging ends.

●If the charging port hatch and charger
are frozen, do not forcibly open the
charging port hatch.

REMINDER

●When the charging port hatch is
locked, do not force it open.

●Do not forcibly attempt to insert
the charger when the electric lock
is locked.

●Do not close the charge port with
the charge port cap open.

●When the vehicle is charged, it
is normal that the cooling fan
and A/C compressor may operate
automatically for the high-voltage
battery to cool down.

General Charging Fault Diagnosis

Page 70

High-voltage battery
temperature is too high
or too low

Keep the vehicle in an environment with
appropriate temperature and charge it when the
temperature becomes normal.

Connect the 12V power supply from other
vehicles. After the vehicle is started, the battery
will be replenished. It is recommended to
replace the battery for subsequent use.

Low-voltage battery
over-discharges.

Confirm that the power indicator of the
charging equipment is normal or there is no
other abnormal prompt, otherwise replace the
charging equipment for charging or contact the
supplier of the charging equipment.

Charging equipment
failure

physical
connection is
complete,
but charging
has not
started.

If powertrain fault warning light on the
instrument cluster is on or charging system
fault message is displayed, stop charging
immediately and contact a BYD authorized
dealer or service provider.

Vehicle displays the fail.

Confirm that the AC charger is connected in
place, and pay attention to the length and
connection position of the charger plug of the
charging equipment.

Improper connection of
AC charging adapter

Standard single-phase,
two-pole, grounded
receptable has no
power.

Confirm whether the overload protection of the
power supply has been triggered. Please use the
specific charging power supply standard single-
phase two-pole with grounding socket.

Charging cable is not
connected properly.
Verify that the charging connection cable is not
loosely connected.

Touch the key,
microswitch, window
control switch or
vehicle start button by
mistake

If the vehicle is unlocked by mistake, the
charging will be suspended for 30 seconds, and
the charging can be resumed after 30 seconds.

Charging
interrupted

Power Failure
After the power supply is restored within a
certain period of time, charging is automatically
restarted.

When the temperature warning indicator on the
instrument cluster lights on, the charging stops
automatically. Then charge the battery after it
cools down.

High-voltage battery
is at the stage of
overtemperature.

04

USING AND DRIVING

Page 71

Check if there is any charging pile or vehicle fault
prompt, and contact a BYD authorized dealer or
service provider if necessary.

Vehicle or charging
equipment fault

Charging Method

Pure electric vehicles are driven by the
electric energy provided by the power
battery. In order to avoid power loss
of power battery and affect the car
experience, it is very important to charge
in time and estimate the power demand
before driving.

Vehicle Charging Method:

1. Household Portable AC Charging

2. Using AC Charging Piles

3. Charging with DC Charging Piles

CAUTION

●The time required to complete
the charging of the power
battery varies with the charging
mode, remaining capacity, real-
time temperature, use time,
ambient temperature and other
conditions.

Charging Mode

1. Charging Reservation (Only AC):
Choose Reservation charging start
time and end time via
touchscreen→Settings→Energy→Char
ge/Discharge→Smart Charging.

2. AC Charging Current Limit (Only AC):
Choose charging current via
touchscreen→Settings→Energy→Char
ge/Discharge→AC Charging Current
Limit.

3. Instant Charging: Charging starts after
the charging connector is connected.

Charging

●Inspection before Charging:

●Check the charging device for
abnormalities such as cracked
housing, worn cable, rusted plug, or
foreign materials.

●Do not charge when the charging
connection becomes loose.

●Make sure the port is clear of fluids
or foreign objects, and its metal
terminals are not rusty or corroded.

●In any of these cases, do not charge.
Otherwise, personal injury may occur
due to short circuit or electric shock.

Household Portable AC Charging

1. Equipment descriptions

●The AC charging connection
equipment consists of a power plug
(complying with National Standards),
charger, plug/charger protection cover,
a connecting cable, referred to as
3-to-7 adapter. The power plug is
connected to the standard household
power socket, and the charger is
connected to the charging port of the
vehicle (The figure is for reference
only).

Page 72

●Equipment specifications: 100-250V
50/60Hz 8A

●Charging time: Refer to the charging
time prompt on the instrument cluster
or touchscreen.

●The power socket shall be a household
socket conforming to relevant national
standards to avoid circuit damage
and tripping caused by high-power
charging, so as not to affect the normal
use of other equipment.

WARNING

●See P68 in section "Charging
Instructions" for charging safety
warnings.

●The highest working temperature
allowed for the product is 50°C.
Store it in a cool and dry place
when it is not in use.

●When charging, do not place the
equipment in the trunk, under the
front of the vehicle, or near the
tires.

●When using the equipment,
prevent it from getting rolled
over by the vehicle, dropped, or
trampled on.

●Do not modify, disassemble, or
repair the charging equipment
and ports.

●Additional wires or
adapters/connectors are not
recommended. If additional
adapters are necessary, select
the appropriate wire diameter (≥
1.5 square milimeter), and the
adapter parameters should meet
the requirements.

●Do not use the charging
equipment when the household
power socket cable gets softened
and the charger is damaged, like

WARNING

worn cables and broken insulating
layers.

●Do not use the equipment when
the charging connector or power
socket experiences a breakage,
crack or other exposed damage.

●To prevent the charging port cover
from malfunction, do not open
and close the cover repeatedly.

CAUTION

04

●The charging cable must not be
placed in a spiral during charging,
as this will affect heat dissipation.

USING AND DRIVING

●For specific charging precautions,
see P68.

REMINDER

●Please contact a BYD authorized
service provider or local
electrician and select an
appropriate power supply as
required for the charging
equipment.

●Grounding instructions for
charging equipment: The
equipment must be properly
grounded. In the event of failure
or damage to the equipment,
the grounding cable provides a
minimum impedance to circuit
discharge and thereby reducing
the risk of electric shock. The
equipment comes with a ground
cable connecting its ground point
with that of the power plug, which
must match a properly installed
and well-grounded power supply
outlet.

2. Charging Instructions

Page 73

●It is recommended that the vehicle is
powered off.

●With the doors unlocked, press the
charge port door to open.

●Open the plug cover of the charging
gun and the vehicle socket to ensure
that there is no obstacle at the end
of the charging gun and the charging
socket. For AC charging, only the upper
charging port plug can be removed,
and the lower plug can be kept in a
blocked state.

●Connect the power supply port:

●Plug the 3-to-7 power supply plug
into the household socket and
the indicator is red. (Pictures for
reference only. The actual local plug
standard prevails.)

●Connect the vehicle charging port:

●Plug the charging connector correctly
into the port.

●Once the charger is connected
properly, the charging connection
indicator on the instrument cluster
or Multimedia goes on. The charging
indicator of the 3-7 connector will
flash (green).

REMINDER

●Do not forcibly attempt to insert
the charger when the electric lock
is locked.

●In the charging process, the
instrument cluster displays
relevant charging parameters and
the charging sign.

●Set the Scheduled Charging on
the infotainment touchscreen →
Settings → Energy → Charge/
Discharge. See P77 for detail.

Page 74

REMINDER

●Set the AC charging current limit
on the infotainment touchscreen
→ Settings → Energy →Charge/
Discharge. See P78 for detail.

●During charging, the estimated
remaining time to full
charge is displayed on
the instrument cluster or
infotainment touchscreen. The
remaining time for a full
charge may vary depending
on such different conditions as
temperature, SOC, and charging
facilities.

●Reservation charging cannot be
used when the remaining battery
is too low.

3. Stopping charging

●End the charging:

●When the vehicle is fully charged,
charging stops automatically.

●To stop charging in advance, go to
the next step.

Disconnect the charger from the charging
port:

●Press the unlock button on the key or
the microswitch on the door handle
(when the key is nearby), and pull out
the charger in 30s.

REMINDER

●To unlock the vehicle, press the
unlocking button on the key
(during charging in the OFF gear)
or the microswitch on the door
handle (when the key is nearby).

●Unlock the vehicle to deactivate
the anti-theft lock before pulling
out the charging connector. The
connector has to be pulled out
within 30 seconds, or the port will
re-lock.

●The anti-theft lock can be set
on the touchscreen →Energy →
Charge/Discharge.

04

●If the charging connector cannot
be removed after unlocking, try a
few more unlocking attempts. If
that does not work, try emergency
unlocking. For the operating
procedure, see P79.

USING AND DRIVING

●Disconnect the power plug.

●Close the charge port cap and charging
port.

●Store the equipment in charging
package properly.

REMINDER

●Do not close the charge port with
the charge port cap open.

Page 75

Using DC Chargers

1. Equipment descriptions

●Charge the vehicle with DC charging
piles in public places, which are
generally installed in specific charging
stations.

●Equipment specifications: Please
check the instructions for the charger.

●Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.

2. Charging Instructions

Connect the vehicle to a DC charging pile
by the charging connector of this pile to
begin DC charging.

●Unlock and open the charging port
cover, and then open the charging port
cap. When opening the charging port
cover, take off the upper cover first,
and then take off the lower one.

●Connect the vehicle charging port:

●Connect the charging connector of
the charging pile to the charge port,
and lock it securely in place.

●Operate the charging equipment to
start charging.

●The charging connection indicator

 on the instrument cluster lights

up.

●In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.

3. Stopping charging

●Stop charging:

●The charging pile stops charging auto
matically when it is set to stop
charging in advance or when the
cahrging is finished.

●During the charging process, pressing
unlock button of the key or the
central control switch twice in 3
seconds will automatically end the
charging.

●Disconnect the charger from the
charging port:

●After the instrument cluster displays
that charging is completed, pull out
the charging connector.

●After the DC charging of charger
is finished, arrange the charging
equipment and place it properly, and
put the charger in the designated
position of the charging pile.

●Close the DC charging port cap and
charging cover: when the charging port
cover is closed, insert the lower cap
first, and then insert the upper cap.

WARNING

●For specific charging safety
warnings, seeP68.

CAUTION

●After charging, if the charging
connector cannot be pulled out,
unlock and pull it out by
emergency unlock function.

●For specific charging precautions,
see P68.

Page 76

REMINDER

●Do not close the charge port door
when the port cap is fully open.

Reservation Charging

●The charging mode of the vehicle
can be set through the Multimedia
touchscreen or intelligent voice
assistant:

●Set the Scheduled Charging on the
multimedia touchscreen → Settings
→ Energy → Charge/Discharge. See
for detail.

●Go to the setting interface by calling
"Hi, BYD. Turn on the Reservation
Charging"; "Hi, BYD. I want to use
the Reservation Charging"; and "Hi,
BYD. Please turn on the Reservation
Charging".

●The vehicle can exit the reservation
charging page by clicking the back
button 

 /home button 

 .

●By calling "Hi, BYD. Turn off the
Reservation Charging"; "Hi, BYD. Exit
the Reservation Charging".

Setting Page

①Scheduled charging switch

② Charging time

③ Repeat cycle

④ Settings

●The factory setting mode is the Instant
Charging, so Reservation Charging is
turned off.

●To schedule a charging, toggle the
reservation charging ON ①, set the
charging start time ② and repeat cycle
③, then save the settings.

●After successful setting of the
Reservation Charging, a prompt of
the charging start time is given by
the multimedia system if the charger
is connected or the power button is
pressed within the charging waiting
time to power off the vehicle; at
this time, you can switch to Instant
Charging as needed.

04

●You can tap the reservation charging
setting icon ④ to turn off the charging
connector connected alert and power-
off alert in the Reservation charging.

USING AND DRIVING

CAUTION

●The reservation charging function
is only developed for the AC slow
charging equipment distributed
by BYD. When the vehicle owner
uses the AC slow charging
equipment that is not certified
by BYD, this function should
be turned off. Otherwise, the
charging equipment may not
respond, resulting in the failure
of reservation or immediate
charging, resulting in insufficient
battery power or even power loss.

REMINDER

●In the process of waiting for
reservation charging, the power
consumption of the whole vehicle
increases. After waiting for a
long time, the vehicle power and
driving mileage will be slightly
reduced, which is a normal
phenomenon.

Page 77

REMINDER

●The instant charging on PAD is
effective only for current preset.
To cancel all presets, please turn
off the preset charging switch on
the setting interface.

●When the battery level is low, the
vehicle is charged at the minimum
level before the reservation,
during which the multimedia
may still display the "Power off"
reminder and "Plug in charger"
reminder, and the corresponding
prompt appears in the lower part
of the instrument cluster.

●The schedule setting is invalid
for DC charging. Charging begins
immediately after a DC charging
connector is connected.

AC Charging Current Limit Function

●The AC charging current limit can
be set through the touchscreen or
intelligent voice assistant:

●Multimedia interface → Setting →
Energy → Charge/Discharge.

●Go to the setting interface by calling
“Hi, BYD. Turn on the AC Charging
Current Limit Function” or “Hi,
BYD. I want to set the AC Charging
Current Limit Function”.

●The vehicle can exit the AC Charging
Current Limit Function page by clicking
the back button 

 /home button 

 .

●Go to the setting interface by
calling “Hi, BYD. Turn off the AC
Charging Current Limit Function”
or “Hi, BYD. I want to exit the
AC Charging Current Limit Function
setting page”.

●AC Charging Current Limit (A):
6/8/10/16/MAX. The factory setting is
MAX.

●The AC charging current can be limited
as required. Click the open button
according to the corresponding current
value to set it.

REMINDER

●The charging time may be long,
which is a normal phenomenon.

●The actual charging current of
the vehicle is also related to
the capacity of the power supply
equipment and the capacity of the
power grid.

Charge Port Anti-theft
Lock

●The charging port of the vehicle has
an anti-theft function to prevent theft.
This function is deactivated by default.
To set up the control function, go
to Multimedia system → Settings →
Energy → Charging Port Anti-theft Lock
Settings and select Activate.

●During the charging process, when
the anti-theft is in “Activate” or
“Deactivate” mode, the charger will
be in the locking state. At this time,
the charger will be locked. In the
Deactivated Mode, users can unlock
and unplug the charger directly after
pressing the mechanical switch. In the
Activate Mode, users can unlock and

Page 78

unplug the charger in the following
ways during charging:

●Press the unlock button on the smart
key when the vehicle is powered off.

●Press the microswitch next to the
exterior handle of the driver's side
door to unlock (with the smart key
nearby).

No.
Electric Lock Anti-
theft Mode Status
Four-door anti-
theft lock state

1
Activated
Locking
No

2
Activated
Unlocked
Yes

3
Disabled
Locking
Yes

4
Disabled
Unlocked
Yes

CAUTION

●After unlocking the charging
connector, it can be pulled out
within 30 seconds. After 30
seconds, it will lock again.

Emergency Unlocking of the Charge
Port

●When the charge port anti-theft lock
fails and the charging connector
cannot be pulled out, use the
emergency pull lock for unlocking, and
then try to pull out the connector.

●Open the front compartment cover,
there is a pull ring in the right front
of the vehicle gutter, and pull the pull
ring to unlock.

●Press the central door lock below the
window inside the driver's door.

●When the vehicle is fully charged,
the charging port anti-theft lock
is automatically unlocked in the
"Deactivated" mode, and must be
manually unlocked in the "Activated"
mode using the above methods.

Whether the
charger can be
unplugged

04

USING AND DRIVING

WARNING

●The emergency zipper can only be
used in emergency situations.

●When using the emergency zipper,
do not pull it violently in an
instant. When the resistance is
large after pulling, it indicates that
it has been completely unlocked
in place. At this time, the charging
gun can be pulled out.

Discharging Device*

●The vehicle supports the discharging
function*: Vehicle To Load (VTOL)*

Page 79

WARNING

●Do not touch any metal terminal
of the discharging socket or
the vehicle charge port during
discharging.

●Stop discharging immediately if
there are any abnormalities such
as peculiar smell and smoke.

●For discharge safety warnings, see
P68.

●Store the product in a cool and
dry place when it is not in use.

●When charging, do not place the
equipment in the trunk, under the
front of the vehicle, or near the
tires.

●When using the equipment,
prevent it from getting rolled
over by the vehicle, dropped, or
trampled on.

●Never use the charging equipment
if the power strip cable becomes
soft, the charging connector cable
is worn out, the insulation layer
is cracked, or any other damage
occurs.

●Never use the equipment when
the discharging connector or
power strip is disconnected or
broken, or when there is any sign
of surface damage.

CAUTION

●Disconnect the discharging
equipment refers to:P68.

●Before discharging, confirm the
vehicle SOC and estimate the
remaining driving range.

●Before V2L discharging, ensure
that the load is turned off.

REMINDER

●Try to use this function when the
SOC is high.

●The V2L function is restricted
when the vehicle SOC is low.

●When the "OFF" gear is connected
to the VTOL connection device for
a long time without output, the
static power consumption of the
whole vehicle will increase. It is
recommended that the user pull
out the discharge gun/charging
gun when the equipment is not in
use.

VTOL Method*

1. Equipment descriptions

●VTOL equipment:

●Off-vehicle discharges through VTOL
connection. (Pictures for reference
only. The actual local plug standard
prevails.)

●Equipment specifications: Rated 250V
50Hz 16A, maximum discharge power
4kW (actual discharge power is related
to charger and load).

2. Discharging Instructions

●Before discharging, deactivate the
anti-theft function.

●Unlock and open the charging
cover,only remove the upper cap of the

Page 80

charging port and keep the lower cap
closed to prevent the lower port from
plugging water under water conditions
during discharging.

●Inspection before discharging:

●Ensure that the battery capacity of
the vehicle to be discharged is not
below 15%.

●Ensure the VTOL adapter is free
of any abnormalities such as
shell rupture, plug rust or foreign
materials.

●Make sure that the charging port
is free of water or foreign matters,
and that the metal terminals are
not damaged or affected by rust or
corrosion.

●In any of these cases, do not charge.
Otherwise, personal injury may occur
due to short circuit or electric shock.

●Connect the VTOL equipment: Connect
the VTOL discharger into the charging
port firstly, then insert the external
plug into the discharging outlet (Be
sure the external plug is safety
positioned and the head face of plug is
in contact with the head face of outlet).
At this moment the outlet indicator
stays on in red, it indicates that the
outlet can be used.

●When using the discharging strip, press
the switch on the discharging outlet
and wait for a few seconds. If the outlet
indicator stays on in red, it indicates
that the outlet can be used. (Pictures

for reference only. The actual local
plug standard prevails.)

●Start discharging:

04

●After the connection is made,
discharge begins and respective
information is displayed on the
instrument cluster.

USING AND DRIVING

3. Instructions for Stopping Discharging

●Stop discharging:

●Pressing unlock button of the key or
the central control switch twice in 3
seconds will disconnect the load.

●Pull out the discharging equipment.

●Close the charge port cap and door
(refer to P72).

●After discharging, put the VTOL
equipment into the storage box of the
trunk.

Page 81

Battery

Power Battery and
Charging System

●The vehicle is powered by a high-
voltage battery that can be charged
and discharged repeatedly. The high-
voltage battery is charged by an
external power source or through
energy recovery when the vehicle
brakes or coasts.

●The high-voltage battery is located
vehicle's chassis, so be careful to avoid
bumping when driving on bumpy or
uneven roads.

Battery Properties

●It is normal that vehicle performance
is affected by battery electrochemical
properties and self-protection and
varies to some extent in the following
conditions:

●When SOC is high, the regenerative
braking performance may decline.

●The vehicle switches to trickle
charging mode at high SOC. If the
charging time is prolonged, the
estimated remaining charging time
displayed on the instrument cluster
may not be accurate.

●When SOC is low, the acceleration
performance may decline.

●When the high-voltage battery SOC is
low, VTOL* cannot be used normally.
Please charge the battery as soon as
possible.

●It is normal for the charging/
discharging capacity of the high-
voltage battery to decrease and
for the charging time to extend at
high or low temperatures. Power

performance may also decline under
extreme temperatures.

●When charging at low temperatures,
the temperature control system can
significantly improve the battery's
charging capability. For details
regarding low-temperature charging,
see P68.

●When the vehicle is used at
low temperatures, the battery's
temperature control system will start
heating the battery as appropriate
to ensure the driving power
and discharging performance and
improve your driving experience.
When the vehicle is driven over short
distances, heating may be ineffective,
which increases power consumption
and decreases driving range.

●When the high-voltage battery is
normal, the driving range of the vehicle
varies with the following factors:

●Driving habit: For example, the
range in frequent acceleration or
deceleration is shorter than that at
constant speeds, and the range is
shorter when driving at high speeds
than when at low speeds.

●Road conditions: For example, the
range driven in rough conditions or
on long slopes is shorter than that
in normal conditions and on even
roads.

●Temperature: The driving range at
low temperatures is shorter than that
at ambient temperatures.

●Use of electric equipment: For
example, the range driven with A/C
on is shorter than that with A/C off.

●Available power of the high-voltage
battery is lower in cold weather
and reduces as the temperature
decreases. When the vehicle is
parked at high power and charged

Page 82

in low temperature environment, the
SOC may jump to 100%.

●The available battery capacity
decreases as the vehicle is used over
time.

Battery Usage Tips

●It is recommended to use the vehicle at
temperatures between -10℃ to 40℃.
When SOC is low, timely charge the
vehicle to ensure enough driving range
and good acceleration performance.

●To ensure long term performance,
avoid driving in extreme temperatures
for over 24 hours.

●In low ambient temperatures, if the
vehicle must be stored for a long time,
it can be placed in an underground
garage or other warmer area to reduce
loss of battery heat, maintaining
vehicle performance.

●Frequent and sudden acceleration or
deceleration should be avoided. Drive
the vehicle on flat and dry roads.
When necessary, turn off high-power
equipment such as A/C or adjust
the A/C temperature to reduce power
consumption of such devices and
increase the driving range.

●Low-power charging contributes to the
service life of high-voltage battery.

●When the vehicle is used for the
first time or after a long idle period,
the SOC displayed on the instrument
cluster may not be correct. It is
recommended to fully charge the
vehicle first.

●It is recommended to fully charge the
vehicle at a regular basis (at least once
a week), and fully charge it from low
battery (SOC <10%) once every three to
six months.

●Under extreme working conditions
(such as frequent sudden acceleration/

deceleration) that cause battery
overheating, if the temperature of
high-voltage battery is excessively
high, it is normal for discharging
capability to decrease gradually. If
the battery temperature keeps rising,
the fault warning light lights up on
the instrument cluster. In that case,
it is recommended to contact a BYD
authorized dealer or service provider.

●When the battery SOC increases
or decreases abnormally, it is
recommended to contact a BYD
authorized dealer or service provider
for inspection.

04

WARNING

In the event of an emergency or
accident, be aware of the following
warnings:

USING AND DRIVING

●To avoid personal injury, do not
touch the high-voltage battery
directly.

●It is recommended to contact a
BYD authorized dealer or service
provider as soon as possible.

●If the high-voltage battery is
damaged and leaking fluid, avoid
any contact with the fluid.
If it comes into contact with
skin or eyes, rinse immediately
with plenty of water, and seek
immediate medical attention.

●If the vehicle catches fire,
use dedicated fire extinguishers
instead of water-based fire
extinguishers.

CAUTION

●To ensure safety of the high-
voltage battery, stop the vehicle
away from flammable and
explosive materials, ignition

Page 83

CAUTION

sources and various hazardous
chemicals.

●The available battery capacity
decreases as the vehicle is used
over time.

●Prolonged exposure to heat
sources and direct sunlight
will reduce high-voltage battery
service life.

●When the vehicle is not to
be operated for an extended
period (over seven days), it is
recommended that the battery
SOC should be kept at 40%-60%
to prolong its service life. When
the vehicle is not to be operated
for over three months, the high-
voltage battery must be fully
charged and then discharged to
40%-60% every three months.
Otherwise, over-discharge may
lead to battery performance
degradation or even damage. Any
vehicle fault or damage so caused
will not be warranted.

●If there is a collision with
the high-voltage battery, contact
a BYD authorized dealer or
service provider immediately for
maintenance.

●Do not add battery coolant*
by users themselves. If needed,
please contact a BYD authorized
dealer or service provider.

Recycling the High-Voltage Battery

When the new energy vehicle is to be
scrapped, please follow the following
procedures:

1. Send the vehicle to a BYD recycling
service outlet, which evaluates the
scrap value of the high-voltage battery.

2. After the evaluation, send the
vehicle to a vehicle recycling and
disassembling enterprise to remove its
high-voltage battery.

3. After the high-voltage battery is
removed, hand over it to the recycling
service outlet for repurchasing.

WARNING

●Owners of new energy vehicles
have the responsibility and
obligation to hand over waste
power batteries to service outlets.
Anyone who hands over a
used high-voltage battery to any
other organization or individual,
or removes/disassembles a
high-voltage battery without
authorization, shall be liable for
any environmental pollution or
safety incident so caused.

Low Voltage Battery

●The low-voltage battery used in
this vehicle is a BYD self-developed
lithium iron phosphate battery. The
smart charging function of low-voltage
battery make the high-voltage battery
with sufficient SOC to charge the low-
voltage battery, so as to extend the
endurance of the low-voltage battery.

① Positive pole

② Negative pole

Page 84

REMINDER

●When the vehicle is powered off
for smart charging, it makes such
a normal sound as when the
vehicle is powered on.

●Make sure that all electrical
equipment is turned off and the
doors are closed when leaving the
vehicle.

Wakeup in case of low vehicle battery
SOC

Wake-up by the driver's door
microswitch:

●The low-voltage battery features the
dormant/ wakeup function. After long-
term parking, if the vehicle locating
and unlocking cannot be realized with
the smart key, the low-voltage battery
may be in a dormant state. Then, press
the microswitch on the driver’s door
handle to wake up the low-voltage
battery. After the vehicle is unlocked,
it can be used normally.

Wakeup by Jump Start:

●When the vehicle cannot be waked
up and unlocked by the driver’s
door microswitch, use the mechanical
key to open the door. Then, a 12V
power supply can be used to start the
vehicle through two special cables for
the jump start. In this case, the low-
voltage battery SOC is low and the

vehicle may become dormant again.
Start the vehicle immediately and keep
it started for over 15 minutes to ensure
that the low-voltage battery is fully
charged.

●The jump start can only be carried
out through the special interface of
the front compartment fuse box. The
connection terminals for the jump start
are shown in the right figure.

① Positive terminal for the jump start in
the front compartment fuse box

② Negative terminal for the jump start

04

USING AND DRIVING

If the vehicle cannot be woken up and
started by the above operations, please
contact a BYD authorized dealer or
service provider immediately.

WARNING

●It is strictly prohibited to connect
the vehicle with other vehicles
for a jump start when its “OK”
indicator is off; otherwise, the 12V
battery may be damaged.

●If the low-voltage battery SOC is
too low or the battery fails, jump
starting may be required. Please
carefully read and strictly follow
the jump starting instructions in
this manual.

●The low-voltage battery contains
an intelligent control module.
To prevent battery damage,

Page 85

WARNING

do not disassemble or damage
this battery without permission,
except in an emergency.

●Please disconnect the negative
terminal of the low-voltage
battery before replacing the parts
and repairing and checking the
vehicle.

●Do not clean the 12V battery with
liquid to avoid ingress of liquid
into the battery.

CAUTION

●The operation space of the front
compartment distribution box is
limited, and there are certain
circuit safety risks at the same
time. It is recommended to carry
out the operation under the
guidance of professionals.

Smart Charging

●Low-voltage battery SOC triggers the
smart charging function to extend the
battery endurance.

●The vehicle supports the smart
charging function, so it is not
necessary to disconnect the negative
terminal from the low-voltage battery
for long-term parking.

CAUTION

●Low-voltage battery SOC triggers
the smart charging function,
resulting in a decrease of the high-
voltage battery SOC or the driving
range in pure electric mode
displayed on the instrument
cluster, which is normal.

Charge Preheating

High-voltage battery preheating is
designed to shorten the DC charging time
in low temperatures.

Charging：

●Enter the battery preheating interface
by the infotainment touchscreen
→Energy → Charging and Discharging.

●Enable or disable battery preheating in
this screen.

REMINDER

●This function is disabled by
factory default.

●This function turns off
automatically when battery
temperature reaches appropriate
range and needs to be turned on
next time.

●Charge preheating cannot be used
during charging.

Usage Precautions

Break-in Period

●If the powertrain is hard to start or
frequently stops turning, inspect the
vehicle immediately.

●If the powertrain makes any abnormal
sounds, stop the vehicle for inspection.

●If the powertrain has severe coolant
and oil leakage, stop the vehicle for
inspection.

●The powertrain needs break-in. This
should preferably be done within the
first 2,000 km in economic mode.
Steady driving instead of high-speed
driving is recommended. The following

Page 86

practices effectively prolong vehicle
service life:

●Avoid flooring the accelerator pedal
when starting and driving the vehicle.

●Avoid speeding.

●Do not drive fast or slow at a single
speed for a long time.

Suggestions for Vehicle
Use

In order to delay the battery
life,the following recommendations are
available:

●Before the vehicle is used for the first
time, it is recommended to do a full
charge of the vehicle. If the full charge
has not been completed after picking
up the vehicle, charge the vehicle in
time after the power is less than 5%
when using it.

●When a vehicle is placed for a long
time (more than 7 days), the power
must be kept to 40%-60%; otherwise,
the service life of the high-voltage
battery is shortened.

●When the vehicle is not to be operated
for over three months, the high-voltage
battery must be fully charged and then
discharged to 40%-60% every three
months. Otherwise, over-discharge
may lead to battery performance
degradation or even damage. Any
vehicle fault or damage so caused will
not be warranted.

●If the meter shows that the pure
electric driving mileage is 0 and the
battery power has been sufficient,
please charge it in time to avoid long
time low power use.

●To keep the battery at its best, charge
it fully with a charging adapter on a
regular basis (at least once a week).

●To ensure long-term performance,
avoid exposing the vehicle to
temperatures greater than 60℃ or less
than -30℃ for more than 24 hours on a
continuous basis.

●After an accident, have the seat belts
checked at a BYD authorized dealer or
service provider.

●Repeated acceleration and rapid
deceleration should be avoided as
much as possible when the vehicle is
in use.

●When the vehicle is in use, it
should be avoided for a long period
of continuous use, as prolonged
operation may cause the battery
temperature to become too high,
affecting the performance of the
vehicle.

04

USING AND DRIVING

●Contact a BYD authorized dealer or
service provider for inspection as soon
as possible in the event of the fault
prompt.

●The vehicle performance will be
limited when the battery temperature
is high. Please have the vehicle placed
until the battery temperature drops
before using it.

REMINDER

●If the meter display drops to
0, it must be recharged. If
it is not recharged within 7
days,it will result in permanent
damage to the battery. And the
resulting damage to the high-
voltage battery pack will not be
honored by BYD under the terms
of the warranty.

●The range depends on the
vehicle’s available power, age
(current battery life), weather,
temperature, road conditions,
driving habits, etc. In cold

Page 87

REMINDER

or hot environments, electric
range is reduced compared to
room temperature, and power
performance is also affected.

Trailer Towing

●This vehicle is designed to carry
passengers. Do not overload it or use
it to tow other vehicles.

●Towing other vehicles has an adverse
impact on the maneuverability,
performance, braking, endurance,
driving economy, power consumption,
and other aspects of performance of
the vehicle itself.

●Driving safety and comfort totally
depend on equipment usage and good
driving habits.

●Damage or malfunction caused by
towing the trailer is not covered by the
warranty.

●When moving a vehicle on a flat trailer,
make sure that the vehicle being
moved is properly secured to prevent
it from sliding back.

Driving Safety
Precautions

No driving after drink

Even a small amount of alcohol reduces
the reaction capability to different traffic
conditions. The more one drinks, the
slower he acts to traffic conditions. No
driving after drink.

Control the speed of the vehicle

Speeding is the main cause of car
crashes. Generally speaking, the faster

the speed, the greater the risk. Please
keep a safe speed according to the road
traffic conditions.

Keeping the vehicle in a safe driving
state

Tire burst or mechanical failure is
extremely dangerous. To reduce the
possibility of such failure, the vehicle
condition should be checked frequently
and the specified inspection items should
be completed regularly.

CAUTION

●Drivers must obtain a driver's
license before driving a vehicle.

●Fatigue driving is not allowed.

●Drivers must obey the traffic rules
when driving a vehicle.

●When driving, please pay
attention to driving. Do not
perform operations unrelated to
driving (such as answering and
calling, adjusting buttons, etc.).

Carrying Luggage

●This vehicle features several
different spaces for convenient
storage of articles. Overloading or
improper accommodation may affect
maneuverability, stability and normal
operation of the vehicle, and reduce its
safety.

●For loading baggage, the total mass
of the vehicle body, all passengers,
and baggage shall not exceed the
maximum allowable mass.

WARNING

●Overloading and improper
accommodation may affect

Page 88

WARNING

stability and vehicle control,
which may lead to accidents.

●Observe the maximum weight
limit and other loading guidelines
in this manual.

●Do not carry highly magnetic
items, as they might interfere in
the vehicle's operating functions.

Carrying Luggage in the Passenger Area

●Properly place or fix all articles to
prevent them from getting loose and
hurting passengers in the vehicle in
case of collision.

●Do not store any items on the rear sill
plate that will obstruct and interfere
with your view and will be thrown
around inside the vehicle in the event
of a collision.

●Make sure that the articles placed on
the floor behind the front seats do
not roll under the seat, so as not to
affect the driver to operate the pedal
or normal adjustment of the seat. Do
not stack the articles higher than the
backrests of the front seats.

●During driving, always keep the
glovebox closed. If the glovebox
is open, knees of passengers may
be injured in case of collision or
emergency braking.

REMINDER

●There are potential safety hazards
in the car full of children's
toys, especially in the case of
emergency braking or collision,
which will not only affect the
safety of driving, but also may
cause harm to children.

Loading Baggage in the Trunk

●Place the baggage evenly on the boot
lid, and put the heaviest luggage at the
bottom and put it forward as far as
possible.

●Secure the articles with ropes or chains
to make sure they do not move during
driving. Do not stack the articles higher
than the seat backrests.

Fire Prevention

To effectively prevent vehicle fires,
please take the following precautions:

04

●No flammable or explosive items are
allowed in the vehicle.

USING AND DRIVING

●Temperatures may reach 60-70°C in a
vehicle exposed to direct sunlight in
summer. Therefore, flammable and
explosive items, such as lighters,
cleaning agents and perfumes stored
in the vehicle can cause a fire or even
explosion easily.

●Make sure cigarettes are thoroughly
put out.

●Smoking is harmful to your health
and may cause a fire. Cigarettes that
not thoroughly put out may cause a
fire.

●It is recommended to go to a BYD
authorized dealer or service provider
for regular vehicle checks.

●Check vehicle wiring, connections,
wiring harnesses, insulation, and
fixed position regularly. Deal with
identified problems promptly.

●Do not modify the vehicle's wiring
or install any additional electrical
appliances.

●Installing other electrical appliances
(such as high-power audio systems
and lights) causes excessive wiring

Page 89

load, resulting in heating of the
wiring harness and fires.

●Improper modification of electrical
appliances and wirings causes
abnormal heating and fires due to
contact resistance. Do not replace
fuses with those beyond the rated
specification of electrical appliances
or with other metal wires.

●Park the vehicle in a proper place.

●Do not park the vehicle in a place
exposed to the sun.

●Always keep portable fire extinguishers
on the vehicle and know how to use.

●To ensure vehicle safety, a fire
extinguisher should be equipped
in the vehicle, and be checked
and replaced regularly. Also, you
should familiarize yourself with use
of the fire extinguisher in case of an
accident.

●Disconnect the negative cable of the
low-voltage battery when the vehicle is
being serviced or repaired.

●In the event of a fire in the vehicle,
take effective measures in a timely and
calm manner to minimize any losses:

●Fires typically show initial warning
signs, such as abnormal noises and
odors in the vehicle body. When
abnormal conditions are found, turn
off and stop the vehicle immediately.
It is best to park the vehicle in a
windproof place, and then put out
the fire using the fire extinguisher in
the vehicle.

●Dial (fire emergency number) to
notify the authorities and insurance
company. Call the insurance
company to report the case, and ask
the insurance company to deal with it
on the spot.

●Find out the origin of the fire. In
case of any smoke in the front

compartment, do not open the
hood immediately (because this
aggravates the combustion and
spread of the fire due to air ingress.
There are limited combustibles in
the front compartment, so the hood
shall be kept closed to control
the flames, which is conducive to
firefighting). The fire extinguisher in
the vehicle can be used to put out
the fire from the front hatch gap
against the fire parts. Or the driver
is supposed to ask for help from the
passing vehicles. If more than one
extinguisher can be borrowed, the
user is supposed to open the front
hatch and fight against the fire.

●After the fire brigade put out the fire,
ask them for a rescue certificate and
statement of fire cause.

●After the accident, contact the
insurance company in time for post-
accident handling.

REMINDER

●In order to mitigate losses in the
event of an accident, the purchase
of commercial insurance (fire loss,
theft, etc.) is recommended.

Saving Energy and
Extending Vehicle Service
Life

●Saving power is simple and easy, and
it helps prolong the vehicle's service
life. Energy saving and cost of repairs
saving tips:

1. Regenerative Braking Setting:

●This vehicle has energy recovery
function and energy recovery intensity
setting function, which can be set on
the touchscreen→Settings → Energy
→ Energy Manager. When the energy

Page 90

recovery mode is set to a larger gear,
it can increase the energy collected
during braking and sliding of the
vehicle. Please set it according to your
driving habits.

2. Maintaining Constant Speed:

●Constant speeds help save energy.
Sudden acceleration, sharp turns
and emergency braking increase the
energy consumption.

●Speeds should be kept constant
as much as possible according to
traffic conditions. Additional energy is
consumed each time when the vehicle
speeds up.

●Acceleration should be constantly
slow. Avoid the sudden startup,
acceleration, or deceleration.

●Prevent emergency braking, and
subsequent brake wear, by keeping
an appropriate distance from vehicles
ahead, and paying attention to traffic
lights.

●Do not drive on congested roads as
much as possible.

●Keep moderate speeds on motorways.
The higher the speed, the higher
the power consumption. Maintaining
vehicle speed within the economical
speed range can save power.

3. Reduce Load:

●The use of the A/C brings additional
load to the motor, resulting in large
power consumption. Turn off the A/C
to reduce power consumption. In nice
weather, it is recommended to use the
fresh air mode for ventilation.

●Do not load unnecessary weight on the
vehicle. Excessive weights will add the
load of vehicle, increasing the power
consumption.

4. Other Tips:

●Maintain proper tire pressure. Low tire
pressure increases power consumption
and tire wear.

●Keep front wheels properly aligned.
Avoid driving into curbstones, and
drive slowly in rough terrain.
Misalignment of the front wheels not
only increases tire wear, but also
increases load on the powertrain and
power consumption.

●Keep the chasis of the vehicle clean
and mud free. This reduces vehicle
weight and prevents corrosion.

04

REMINDER

●Do not coast in neutral gear.

USING AND DRIVING

Snow Chains

●Snow chains are for emergencies or
areas where they are permitted by
laws only.

●Snow chains are to be fitted to
the front wheels and extra care is
required for driving a vehicle fitted
with snow chains on icy roads.
Some snow chains may damage the
tires, wheels, suspension and body
of the vehicle.Therefore, thin snow
chains should be selected to provide
sufficient free space between the tires
and other parts in the wheel cover.

●Install the chains symmetrically and
remove them immediately after driving
on snowy or muddy roads.

●Please carefully check and read the
component assembly drawing and
other instructions of the anti-skid
chain manufacturer.

●Before purchasing and installing snow
chains, consult a BYD authorized
dealer or service provider where your
vehicle was purchased.

Page 91

●In order to minimize wear of wheels
and snow chains, do not travel with
snow chains on roads without snow.

●Do not drive above 30 km/h or the limit
speed specified by the snow chain
manufacturer, whichever is lower.

●Do not install snow chains with low tire
pressure.

WARNING

●If an abnormal sound is heard
from the snow chain, please stop
the vehicle immediately to check
whether the vehicle components
such as suspension, body or brake
lines are normal, and ensure that
there is no contact between them
and the snow chains.

●For vehicles with snow chains,
avoid sharp turns or braking with
locked wheels, and slow down the
vehicle before entering a curve
to avoid accidents due to loss of
control.

●Drive carefully, paying attention
to bumps, potholes, and sharp
turns that can cause the vehicle to
bounce.

Starting and
Driving

Starting the Vehicle

In normal cases, start the vehicle as
below:

●Engage the parking brake firmly.

●Turn off all unnecessary lights and
accessories.

●Place the gearshift lever in the P or N
position.

●Carry a valid smart key ①.

●Press the brake pedal ② and START/
STOP button ③.

●The vehicle is ready to drive when
the OK indicator lights up on the
instrument cluster.

The vehicle cannot power on when:

●The vehicle cannot power on when:

●When pressing the Start/Stop button,
if the smart key system indicator
lights up, the vehicle horn makes
a sound, and the information
display screen of the instrument
cluster displays "No key detected",
it indicates that the electronic smart
key is not in the vehicle or cannot be
detected due to interference.

●Even if the electronic smart key is
inside the vehicle, the vehicle may
not be started either when the key
is on the floor, in the boot, or in the
right glovebox.

Page 92

Starting the vehicle in emergencies
when the braking signals are missed or
wrong:

●Engage the parking brake firmly.

●Turn off all unnecessary lights and
accessories.

●Place the gearshift lever in the P or N
position.

●Ensure the vehicle is powered off.

●Make sure the electronic intelligent key
is inside the vehicle.

●Press and hold the START/STOP button
for more than 15 seconds to start the
vehicle.

REMINDER

●Do not touch the power button
while driving.

Safety inspection before driving

General Exterior Iinspections of Vehicle

●Tire: check the tire pressure and
carefully check whether there are
cuts, damages, or foreign matters on
the tread, and whether the tires are
abnormally or excessively worn. In
case of excessive wear or eccentric
wear, drive the vehicle to a BYD
authorized dealer or service provider
for four-wheel alignment and relevant
inspection as soon as possible.

●Wheel nuts: Confirm whether nuts are
loose or missing.

●Leakage: check underneath the vehicle
for leakage of oil, coolant or other
liquids (except water droplets from A/C
condensation) after the vehicle stops
for a while.

●Lighting: Confirm that headlights,
position lights, turn signals, and other

lighting facilities all work normally.
Check the light intensity of headlights.

General Interior Inspections of Vehicle

●Seat belt: Check whether the buckle
can be fastened. Confirm that the seat
belt is not worn or scratched.

●Instrument cluster: confirm that the
maintenance indicator, instrument
cluster lighting and defroster work
normally.

●Brake pedal: Confirm that the
brake pedal has enough space for
movement.

04

Inspections Inside the Hood

●Spare fuses: Verify that spare fuses of
all rated charges in the fuse box are
available.

USING AND DRIVING

●Coolant level: Confirm that the coolant
level is correct.

●Brake fluid level: Confirm that the
brake fluid level is correct.

●Low-voltage battery and cables:
Check the connector for corrosion or
looseness, and check the shell of the
battery for cracks.

Inspections after vehicle startup

●Instrument cluster: Confirm that
the maintenance indicator and
speedometer work normally.

●Brake: Test the vehicle in a safe
place to determine whether the vehicle
deflects toward any direction during
braking.

●Other abnormalities: check for loose
parts, leakage and abnormal noise.

Preparation before driving

●Check the surroundings of the vehicl
before getting on the vehicle.

Page 93

●Adjust the seat position, seat backrest
angle, seat cushion height, head
restraint height, and steering wheel
angle and height.

●Adjust the rearview mirrors.

●Make sure all doors are closed.

●Fasten the seat belt.

Remote Start

Remote Start with the Electronic Smart
Key

●Press and hold the start/stop button
on the smart key to start the vehicle.
After the vehicle is started successfully,
the turn signals flash 3 times.

●Press and hold the start/stop button
on the smart key to start the vehicle.
After the vehicle is started successfully,
the turn signals flash 2 times.

●If there is no operation within 10
minutes after remote start, the vehicle
stops and powers off, and turn signals
flash twice.

REMINDER

●Do not pile up children's toys
in the vehicle. Such toys may
affect the driving safety in case of
emergency braking or collision.

Gear Shift Controls

Gear positions of the transmission are
marked on the instrument switch group,
as the figure indicates.

●"R": Reverse. Shift to R only after the
vehicle stops.

●“N”: Neutral. Used for temporary
stop. The Parking gear must be
engaged whenever the driver leaves
the vehicle.

●“D”: Drive. This gear is engaged for
normal driving.

●“P”: Park.This gear shall be engaged
before the vehicle is started or after the
vehicle is parked. Start the vehicle and
press the brake pedal to shift the lever
from P to another position.

WARNING

●If the motor is shut down, do not
move the vehicle after shifting to

Page 94

WARNING

the "N" gear to avoid accidents
due to insufficient braking force.

●If the motor is running and the
vehicle is in R/D, be sure to
press the brake pedal to stop
the vehicle. Because even under
idle conditions, the transmission
can still transmit power, and the
vehicle may move forward slowly.

●During driving, do not press the
accelerator pedal while shifting
gears to avoid accidents.

●To avoid accidents, do not shift
lever to the "R" gear or press the
"P" button during driving.

●Never coast downhill in "N” gear,
even if the motor is not running.

●To prevent the moving of the
vehicle, pull up the EPB after the
vehicle stops stably and press the
"P" button.

CAUTION

●To prevent damaging the
transmission, press the "P"
button only after the vehicle has
completely stopped.

Electronic Parking Brake
(EPB)

Be sure to engage the EPB every time
before parking and leaving the vehicle.

Engaging EPB Manually

Set EPB on the "EPB" option on
infotainment touchscreen, when you
press the brake pedal and EPB is
released, EPB applies an appropriate
parking force, the indicator on the

instrument cluster flashes and then is
steady on, indicating that EPB is engaged.
In addition, a text prompt "EPB activated"
is displayed.

CAUTION

●When 

 flashes, EPB is

working. If the vehicle is on a
slope, do not release the brake

pedal until 

 is steady on.

Otherwise the vehicle may move
down.

04

Engaging EPB Automatically

This function is designed to improve
the vehicle safety. Excessive reliance on
or frequent use of the function is not
recommended. To ensure safety, make
sure that the transmission is shifted to P
or the EPB is engaged before leaving the
vehicle.

USING AND DRIVING

●Switching the power from OK to OFF
engages the EPB automatically. The
indicator 

 on the instrument cluster
lights up.

●Press the brake pedal to stop the
vehicle and shift into Park. EPB is
engaged automatically. Do not release
the brake pedal until the indicator
on the instrument cluster 

 stops
flashing and becomes steady on
and the "EPB activated" message is
displayed.

●Press the brake pedal to stop the
vehicle and shift into Park. EPB is
engaged automatically. Do not release
the brake pedal until the indicator
on the instrument cluster 

 stops
flashing and becomes steady on
and the "EPB activated" message is
displayed.

Page 95

Automatic EPB Release upon Vehicle
Start

●When the vehicle is parked, start the
vehicle, press and hold the brake
pedal, and shift to D or R from P or
N to automatically release EPB. The
indicator goes out, and a text prompt
reading "EPB released" is displayed.

CAUTION

●Please follow the correct shift
instructions and keep depressing
the brake pedal throughout the
shifting process. Do not release
the brake pedal until the gear
position shown on the instrument
cluster is the target one.

●Within several seconds after the
vehicle is started, the EPB system
will conduct self-check upon
power-up. In this process, the EPB
will not respond to any function.

●When the vehicle has been started and
the gear is in a driving gear such as
Drive or Reverse, engage EPB on the
infotainment touchscreen, then simply
press the accelerator pedal slowly
to a certain degree. EPB is released
automatically and 

 turns off with
the message "EPB released" displayed.

Emergency Braking When Brake Pedal
Fails

●During driving, if the brake is blocked
or fails, press the "P" gear switch
continuously for more than 2 s to
realize emergency braking.

CAUTION

●For safety considerations, refrain
from using EPB for braking in
normal driving. It is preferred to

CAUTION

be used when the brake pedal
fails or is blocked.

●Because EPB cannot exceed
the physical limit of road
adhesion, using the emergency
braking function when passing
through curves, dangerous roads,
and traffic congestion sections,
or driving in severe weather
conditions may cause the vehicle
to drift, slip or deviate, so
attention should be paid to avoid
accidents.

CAUTION

●To ensure driving safety,
avoid using the "P" button
for emergency braking under
normal circumstances. In case
of emergencies such as power-
assisted brake failure or brake
pedal blockage, the driver must
always maintain control of the
vehicle and properly use the
emergency braking function.

EPB System Indicator

●When the vehicle is powered on, if the
EPB is engaged, the indicator 

 on
the instrument cluster stays on.

●When the power of the vehicle is
turned off, if the EPB is turned on, the
indicator 

 light on the instrument
will turn off after a few seconds.

●When the vehicle is powered on, the
EPB system performs self-inspection.
The indicator 

 on the instrument
cluster lights up for a few seconds and
then goes out. If it does not go out,
it indicates that the EPB system or
braking system may be faulty. Contact

Page 96

a BYD authorized dealer or service
provider immediately.

EPB Operating Sound

●EPB motor noises can be heard while
the EPB is being engaged or released.

●After the emergency braking function
is activated, if burning smell or
abnormal noise appears, contact a BYD
authorized dealer or service provider
immediately.

WARNING

●To prevent the vehicle from
moving, the gearshift is not to
be used to replace EPB when
parking. EPB must be used
instead, and the vehicle must be
in "P" gear.

●The Electronic Parking Brake
(EPB) switch must not be
operated when the vehicle
is moving to prevent severe
accidents.

●When the EPB switch is pulled
or released, the brake pedal
must be pressed to prevent
the vehicle from moving, and
the subsequent locking of the
gearshift that occurs because
EPB cannot provide a sufficient
parking force.

●Avoid using the EPB system to
stop the vehicle. The emergency
braking function can only be
activated in case of emergency
situations such as pedal brake
failure or brake pedal blocked.

●Because EPB cannot exceed
the physical limit of road
adhesion, using the emergency
braking function when passing
through curves, dangerous roads,
and traffic congestion sections,
or driving in severe weather

WARNING

conditions may cause the vehicle
to drift, slip or deviate, so
attention should be paid to avoid
accidents.

Automatic Vehicle Hold
(AVH)

Automatic vehicle hold (AVH) is a feature
designed to hold the vehicle stationary
when it comes to a stop, under conditions
such as getting stuck in traffic or waiting
at a traffic light. AVH automatically
activates when the brake pedal is pressed
to stop the vehicle (vehicle speed
decreases to zero) on the premise that
the conditions for AVH standby state are
met.

04

USING AND DRIVING

Press the AVH button to turn AVH on.

CAUTION

●To exit the activated AVH and set
it to the standby mode, press the
accelerator pedal or shift to P. If
the AVH standby state are not met,
it will be off.

AVH Standby Preconditions (All Must Be
Met)

With the AVH function activated:

●The driver seat belt is fastened.

Page 97

●The driver's door is closed.

●The vehicle is started.

●ESC are free from any fault.

CAUTION

●The AVH is off by factory default.

Conditions for AVH function

●The AVH function is standby.

●The brake pedal has been pressed to
bring the vehicle to a stop.

●After hard depressing of the brake
pedal, the AVH function has been
activated and the AVH indicator has
turned green.

●The vehicle automatically requests
that the EPB be engaged 10 minutes
after AVH activation. After the EPB
has been engaged, the AVH function
returns to standby mode.

CAUTION

●For AVH to be activated, all the
conditions must be met at the
same time.

●For AVH to be activated, all
conditions of automatic parking
function must be met.

●When you shift from "R" to "D"
or "N", the system automatically
enters slow-moving condition, in
which AVH is deactivated. When
the vehicle speed exceeds 10
km/h, it exits the slow-moving
condition automatically.

Driving Precautions

●When driving on the road with
curbstone, drive slowly and keep the
correct angle as far as possible. Avoid

driving on objects with high sharp
edges or other road obstacles, which
will cause serious tire damage.

●Slow down when driving on bumpy
roads or rough roads. Otherwise, the
impact may seriously damage the
wheel.

●Avoid driving through flooded areas as
much as possible.

WARNING

●The driver shall ensure the
safety of all passengers in the
vehicle, guide them to properly
use vehicle features, and prevent
misuses by passengers such as
children.

REMINDER

●The battery is located in the
vehicle's chassis, so be careful to
avoid bumping when driving.

●Before driving, make sure that
EPB is fully released and the EPB
indicator is off.

●When the vehicle is at the stage of
OK, do not get out of it.

●Remember to bring the key when
leaving the vehicle.

●Slow down when driving down
long steep slopes. and avoid
braking too frequently to prevent
disc overheating, which affects
brake performance.

●Drive with care when accelerating
or braking on slick roads. Quick
acceleration or sudden braking
will cause the vehicle to skid or
deviate.

●To avoid traffic accidents or even
life-threatening injuries, make
sure no one extends any body

Page 98

REMINDER

part out of any window when the
vehicle is running. Stay vigilant,
especially when any child is in the
vehicle.

●Avoid driving through flooded
areas as much as possible.

●Large amounts of water
entering the engine compartment
can cause damage to the
power system and electrical
components.

Precautions after driving through
waterlogged road stretches:

●The depth of water must be
ascertained to ensure it will not exceed
the lower edge of the vehicle body.

●Before driving through a waterlogged
road section, turn off the A/C and shift
to a low gear. Then gently press and
hold the accelerator pedal to drive
through the section at a slow and
steady speed.

●Do not park the vehicle in water, or
reverse the vehicle and turn off the
motor in water.

●Drive carefully as driving through deep
water may wet the brakes. Press the
braking pedal slightly and make the
brake dry.

●After driving through the flooded area,
press the brake pedal several times

continuously and gently to evaporate
the water on the brake disc, so as to
restore normal braking performance as
soon as possible.

WARNING

●If there is any water or mud
on the brake disc, it may result
in delayed brake reaction and
extended braking distance, so
attention should be paid to
preventing accidents.

●Caution! The ice or water on the
brakes must be cleaned.

04

●Avoid emergency braking as much
as possible after driving through
waterlogged road stretches.

USING AND DRIVING

●If the vehicle drives on the
waterlogged road. If the vehicle
is running on a low-lying and
waterlogged road, prevent water
ingress into the motor; otherwise,
the motor may be seriously
damaged. The resulting vehicle
fault and damage may not be
covered by the warranty.

●After the vehicle is driven through
the waterlogged road stretches,
the transmission system, driving
system, electrical system, and
other vehicle components may
also be seriously damaged.
The resulting vehicle fault and
damage may not be covered by
the warranty.

Influence of water ingress on high-
voltage components

●High-voltage components are
electronic devices. After the vehicle
is soaked in water, drying the high-
voltage components in the sun or air
cannot ensure the full evaporation of
water.

Page 99

●Water ingress may also greatly
affect the insulation of high-voltage
components; at the same time, the
conductive substances contained in
water may cause internal short circuits
of high-voltage components or high-
voltage systems. In this case, the safety
and service performance of the vehicle
may be seriously affected.

●Water ingress into high-voltage
components has a severe impact on
the product's IP rating, ability to
withstand voltage and other areas of
performance, which poses great safety
risks. Should this occur, contact a BYD
authorized dealer or service provider
immediately.

Winter Driving Precautions

1. Make sure the coolant is freeze-proof.

●Use coolant of the same type as the
one used originally. Fill up coolant
into the cooling system based on
ambient temperature.

●Improper coolant will damage the
cooling system.

2. Check the battery and cable
conditions.

●In winter, ensure that the 12V battery
has sufficient charge to start the
vehicle, as low temperatures can lead
to a decrease in the battery's energy
output.

3. Avoid the door lock frozen by ice and
snow.

●Spray some deicing agent or glycerin
into the door lock hole to prevent
icing.

4. Use washer fluid containing antifreeze.

●Such products are available in
BYD authorized dealers or service
providers and all auto parts stores.

●The mixing ratio of water and
antifreeze shall comply with the
manufacturer's instructions.

CAUTION

●To prevent damage to the
vehicle's paintwork, use a special
washer fluid.

5. Avoid accumulation of ice and snow
under the mudguard.

●The accumulation of ice and snow
under the mudguard may make
steering difficult. When driving in
cold winter, pull over the vehicle
often to check whether there is ice
and snow accumulated under the
mudguard.

6. It is recommended to carry several
necessary emergency tools or items
according to different road conditions.

●It is advisable to have snow chains,
window scraper, bags of sand and
salt, flashing signal, a shovel and
connecting cables in the vehicle.

Winter Tires

●Winter tires provide better traction
on snowy roads. The special rubber
tread pattern makes the tires less
affected by low temperatures and
delivers excellent braking performance
to improve driving safety.

Usage tips

●It is recommended to use winter
tires in snow or ice conditions or
at temperatures below 7°C. When
temperatures rise to above 7°C, install
summer or all-season tires instead for
driving safety and better performance.

●Winter tires must be the same size,
load index, and speed rating as those
originally provided by BYD.

Owner's Manual BYD ATTO 1

Manual Terkait Lainnya